Brake warning light
On the way home from work tonight the brake warning light came on. I looked in the manual which said this indicates a low pressure problem. Does anyone have any insight on this? The brake system on this vehicle is getting me totaly frustrated.Once again any info would be most helpful.
Brakes.. my most hated thing on the jeep
Are you having a hard time stopping? Brakepeddle feel the same? any vibs, pulling to one side etc?
I would check the following as a few 1st steps:
1. Fluid level
2. connection between brake line and either caliper or drum cylinder (I think that's what they call it for the rear)
3. If nothing there.. check your front calipers, could have one that is worn or sticking..also could be worn pads...
4. Bleed the system and see what that does if you came up empty on the other stuff
last but not least, keep in mind that the light is just coming on 'cause the switch told it to. maybe the switch is bad :)
|All times are GMT -5. The time now is 08:30 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.