Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   New winch and loop over install!! (http://www.wranglerforum.com/f274/new-winch-and-loop-over-install-62727.html)

ncossey 09-22-2010 09:12 PM

New winch and loop over install!!
 
Okay so my winch and hoop over came in the mail today, so of course I had to jump right in and install it. I decided to attempt to install it without dropping my xhd bumper, and believe it or not, there was more than enough room to install the winch with the bumper already attached. Overall I give it about a 3/10 in difficulty, and believe that just about anyone could do it. Took me less than an hour to completely put the winch together, install it, and then attach the synthetic rope and wind it in. Below are pic

http://img835.imageshack.us/img835/4954/img0228fz.jpg
Uploaded with ImageShack.us

http://img808.imageshack.us/img808/8672/img0226s.jpg
Uploaded with ImageShack.us

http://img693.imageshack.us/img693/7111/img0225m.jpg
Uploaded with ImageShack.us

JeepDiver 09-22-2010 09:17 PM

Thank you for the picture being as I've been looking at that modular bumper for awhile now, it does look good. Makes me want to buy a winch.

mhaines 09-22-2010 09:26 PM

Quote:

Originally Posted by ncossey
Okay so my winch and hoop over came in the mail today, so of course I had to jump right in and install it. I decided to attempt to install it without dropping my xhd bumper, and believe it or not, there was more than enough room to install the winch with the bumper already attached. Overall I give it about a 3/10 in difficulty, and believe that just about anyone could do it. Took me less than an hour to completely put the winch together, install it, and then attach the synthetic rope and wind it in. Below are pic


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us

Very happy with our xhd, thinking about the new storage ends.


All times are GMT -5. The time now is 08:22 PM.