Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Jeep Part-Outs (http://www.wranglerforum.com/f140/)
-   -   MO: YJ parts of all kinds (http://www.wranglerforum.com/f140/yj-parts-of-all-kinds-63219.html)

Ibuildembig 09-27-2010 11:40 AM

YJ parts of all kinds
 
I rebuild and part out YJ's, so shoot me a PM if you need a part. I try to keep every single thing that is good off um, so don't hesistate to try :)

Thanks

Esco 10-07-2010 01:29 PM

Do you happen to have these YJ parts...

1 of the brackets that holds the rear seats down. it bolts on to the side of the fender well has a C shape.

2 of the big bolts that hold the seat belt in place. it bolts into the upper area of the roll bars.

4 of the rubber protecters and bolts that bolt onto the back of the tail gate. To protect the spare tire from rubbin up on the tail gate.

Thanks
Dan

beefmobile 10-13-2010 12:10 PM

got any type of lift kit? i already did a spring-over conv and shackles, but im looking for abou 2.5" more height.

what about a soft top and hardware?

Ibuildembig 10-13-2010 01:32 PM

Quote:

Originally Posted by Esco (Post 807099)
Do you happen to have these YJ parts...

1 of the brackets that holds the rear seats down. it bolts on to the side of the fender well has a C shape.

2 of the big bolts that hold the seat belt in place. it bolts into the upper area of the roll bars.

4 of the rubber protecters and bolts that bolt onto the back of the tail gate. To protect the spare tire from rubbin up on the tail gate.

Thanks
Dan

Yes I should have that seat bracket and maybe the bolts for it

I know I have the rubber bumpers for the gate

PM me and I will see what I can do

Sorry it took me so long to post, I didnt know I had any replies

Ibuildembig 10-13-2010 01:33 PM

Quote:

Originally Posted by beefmobile (Post 817497)
got any type of lift kit? i already did a spring-over conv and shackles, but im looking for abou 2.5" more height.

what about a soft top and hardware?

Well I have a brand new 4" RC lift still in the box, but that's prolly gonna give you more than you want. Although you could put it on and take the longer shackles off and it should be close.

Wiegand 10-13-2010 01:56 PM

Got any sound bars? In good shape.
If so shipping to 32570

Square_Eyes 10-13-2010 07:44 PM

How much for the lift kit?

bowtiedj 10-13-2010 08:54 PM

tranny crossmember
 
i need a nice transfercase tranny crossmember or skid plate that dont have rust on it for a 95 yj 4 cyl with 5 speed. its the wide six bolt plate that tranny tail mount bolts to. thanks ej ej91236@msn.com

wking72650 10-13-2010 09:11 PM

Do you have a left (driver side) axle shaft to fit a 87 YJ?
If so how much?

Ibuildembig 10-13-2010 11:48 PM

Which kit? I have a SOA in stock brand new and the 4" spring kit brand new

I don't have any axle parts right now...:(

Square_Eyes 10-14-2010 01:36 AM

Already have soa, how much for the 4" spring kit?

Ibuildembig 10-14-2010 09:03 AM

I'd like to have 375 for it considering they are 450 new from RC

kilz42 10-14-2010 10:54 AM

Do you have any leaf shackles?

Rcordero 10-17-2010 07:08 PM

Quote:

Originally Posted by Ibuildembig
I rebuild and part out YJ's, so shoot me a PM if you need a part. I try to keep every single thing that is good off um, so don't hesistate to try :)

Thanks

Looking for seats, do you have any available?

Rcordero 10-17-2010 07:09 PM

Looking for some seats, do you have any?

Ibuildembig 10-17-2010 08:50 PM

Quote:

Originally Posted by kilz42 (Post 819440)
Do you have any leaf shackles?

I will this week when I cut one apart

No family cages at this time

I will have a set of gray seats this week too

vhfd3 10-18-2010 04:39 PM

Do you have instrument cluster? The one with fuel, oil pressure, water temp and clock.

Ibuildembig 10-18-2010 04:40 PM

Yes I should, PM me and I will look tonight when I get home

toshpate 10-18-2010 04:43 PM

gas tank? and are they hard to install? I have a hole in mine from the stupid tailpipe. ugh. stupid jeep for not puting shielding on a tank so close to a tail pipe

Ibuildembig 10-18-2010 04:48 PM

Nah they are pretty easy....you have a plastic one right? I have 4 or 5 in stock

vhfd3 10-18-2010 04:54 PM

YJ gauges
 
PM sent.

wranglerYJnewb 10-18-2010 05:01 PM

Quote:

Originally Posted by Ibuildembig (Post 818837)
Which kit? I have a SOA in stock brand new and the 4" spring kit brand new

I don't have any axle parts right now...:(

PM me what all you have for the SOA kit and price.

Not sure yet if I'm gonna go spring over axle or leaf spring lift. I don't have access to a welder.

wranglerYJnewb 10-18-2010 05:02 PM

do u have stock height brand new leaf springs or maybe a 1" or 1.5" leaf spring for the SOA?

Ibuildembig 10-18-2010 11:30 PM

I have a really nice used set of stock springs, but no new ones

toshpate 10-18-2010 11:45 PM

yea plastic. But yea still sucks...

crunch 10-19-2010 10:48 AM

One half door pin to hold the hard half door tops on and six good inserts if you have them color doesn't matter

beefmobile 10-19-2010 03:13 PM

Hey guys I asked about the lift kit first! Lol.

But since I already have a SOA, I can still install a regular lift kit right?

If so im definitely interested in your roughy country kit you have. An extra 4" wont hurt. Where are u located?

Ibuildembig 10-19-2010 03:16 PM

Yes you can install lift springs on your SOA, you might have to make a longer TC drop though. I'm 90 miles south of st louis missouri

Ibuildembig 10-19-2010 03:17 PM

Quote:

Originally Posted by crunch (Post 828375)
One half door pin to hold the hard half door tops on and six good inserts if you have them color doesn't matter

No pins, I leave them on the doors when I get um

What do you mean by inserts? door panels?

NHrubicon 10-19-2010 03:29 PM

I've got brand new, in the box...front and rear bumpstops for 2.5'3" lift (Daystar), front sway bar bushing kit (red urethane, new), complete 1" body lift mount kit (red urethane)
plus other stainless steel bolt kits, new, and some used stuff from a 94 YJ rebuild we had done...saved the windshield hinges, door hinges, gate bumpers, even have an aluminum radiator complete with transmission cooler on the bottom...
signman@sunrisegraphics.org


All times are GMT -5. The time now is 04:36 AM.