Originally I wasn't getting spark so I changed the cap and rotor, seems to be getting spark but won't start, could it be the cps? I checked it and it seems to be ok but I'm not sure what it could be at this point... Thanks in advance
10-01-2010 02:58 PM
Is this problem new? did you do anything prior to the problem like change the distributor or wires?
10-01-2010 07:02 PM
I just got it and the original engine had problems, when I took it apart there was gouges on the cylinder walls in the 1 and 5 cylinders.. I got a new engine an put it in and originally the 1 and 5 cylinders were not sparking.. I used the new block and head from the new engine everything else from the old, I am not sure what is causing the same cylinders not to spark tho... I changed the cap and rotor and the it didn't help, could I have a bad distributor? The spark is intermittent, I'm getting it on and off so I'm not really sure