Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   Right C-Clip on Dana 35 is not coming out. (

Mreynolds69 10-08-2010 11:08 PM

Right C-Clip on Dana 35 is not coming out.
I need help. I am replacing the spider gears with a locker and the right axle will not push in far enough to drop the C clip. Any suggestions?

jeepjones 10-08-2010 11:24 PM

Give the flange a wack with a hammer, it'll move.

4Jeepn 10-08-2010 11:33 PM

motivate it.. also are you upgrading the shaft?

Mreynolds69 10-09-2010 07:58 AM

No other upgrades. Just replacing the spider gears. I did this about eight years ago on my '98. I didn't remove the tires or anything. I guess I need to do this in order apply force.

4Jeepn 10-09-2010 08:03 AM

each jeep is different..use the least amount of force needed. Also go lite on the gas with the locker and 33's on stock shafts.

Mreynolds69 10-09-2010 08:24 AM

Thanks for the help. I live in Central Florida, so mud and sand hills are all I have.
I will remove the tire and try tapping with a hammer.

Mreynolds69 10-09-2010 12:25 PM

Done. Removed the tire and the drum and the axle slid right into the housing. In and out in 30 minutes. Thx!

All times are GMT -5. The time now is 12:35 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.