I have a 87 2.5 that I have rebuilt. Put it all back together and now it wont run correct. It will idel fine with no problems but when you drive it it backfires and has no power, its sounds like a timing problem but I have checked it several times and does not seam to be the case.
Does anyone have any ideas on what should be my next move?
10-16-2010 02:09 PM
Double check the timing, plug wires sequence and all vacuum connections. Have you set the dist on #1 when on TDC?
10-16-2010 02:11 PM
^^ second that.........
10-16-2010 02:20 PM
I have set it on TDC meny times over. Vacume lines my need to be looked at but i done have a clear dirgram of system. I installed new plugs and wires.