Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ Tech Forum (
-   -   Parking brake lever to secondary brake shoe... (

Jollyczar 10-23-2010 11:39 AM

Parking brake lever to secondary brake shoe...
3 Attachment(s)
I'm in the middle of finally replacing my rear brakes. I've got all new parts and the FSM is telling me to "Attach parking brake lever to secondary brake shoe. Use new washer and u-clip to secure lever".

I know what the parking brake lever is and I assume the secondary shoe is the trailing shoe. Where the hell do the washer and u-clip go? I've got a set that came with the kit but there weren't any there on the original setup when I took it apart.

Here are some pics....

Atthehop 10-23-2010 11:58 AM

You should have removed one to get the lever off the shoe. They just want you to use a new one since the old one may fail and cause the lever to come off and lock up the brakes.

Jollyczar 10-23-2010 12:09 PM

Where does it go? I can't find a picture or diagram anywhere. I know how the lever and shoe go, I just can't figure out where to put the washer and clip.

Atthehop 10-23-2010 12:21 PM

Check this how to:

Jeep Rear Drum Brake Remove - Install and Adjust

If you don't have to remove one than you do not need one for your year. It just may be for certain years.

All times are GMT -5. The time now is 05:01 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.