Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   1997 Wrangler Check Engine Light (http://www.wranglerforum.com/f282/1997-wrangler-check-engine-light-68062.html)

kings97tj 11-07-2010 07:17 PM

1997 Wrangler Check Engine Light
 
I have a 1997 TJ with 2.5 and a 5 speed. It has a check engine light on. The reader said it was the purge sensor, purge canister, or vacuum leak. Replaced the sensor and was unable to find a vacuum leak. Reset the code, but the light is back on. Was curious if anyone else had this problem? Any suggestions? Thanks!

JD Adams 11-07-2010 07:22 PM

If you've replaced the sensor (why you did this before examining the canister and plumbing for a leak is a mystery to me,) might I suggest you find the cause of the problem, which is most likely a leak in the vacuum lines. Grab a vacuum pump, start pulling hoses and find the one that is leaking. It is most likely a split rubber hose or broken T-connector, or a malfunctioning solonoid controlling the system that is at fault. At best, something was accidentally knocked off the last time you worked on it.

kings97tj 11-07-2010 07:28 PM

Ok cool thakns! I bought the sensor because it was only like 15 bucks.


All times are GMT -5. The time now is 11:50 PM.