||11-07-2010 09:34 PM
Ok guys. I've ran into a problem. I have a 92 jeep wrangler. Bought a new transfer case and have been trying to install it this weekend but can't get it to work. It's the np231 j and the new one has a slip yoke eliminator. My old drive shaft won't work cause it was used for the original transfer case so I can't put it on yet. But however, I can only get the transfer case to go into neutral and 4 hi. It only has two shift positions instead of 2wd neutral 4 hi and 4 lo. I was wondering If anyone could help me with this please!!!