Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   Motor Mount Lift (

jherrin215 03-24-2007 01:07 AM

Motor Mount Lift
Anybody know a good place to order a good Motor Mount lift?? I need a 1 inch lift and the only place I can find them is 1 on quadratec and it's spacers for 60 bucks shipped, and the other is on 4WD hardware and it is complete new mounts and it is 100 plus shipping. Any suggestions would be greatly appreciated. Thanks

1BLKJP 03-24-2007 01:21 AM

I have the M.O.R.E (Mountain Off Road Enterprise) Bombproof 1" MM's. They aren't pucks, they are full replacement MM's. I'm not a big fan of the pucks.

jherrin215 03-24-2007 02:37 AM

Where did you get them, or where would be a good place to check?

Jerry Bransford 03-24-2007 12:32 PM

One thing to know is that motor mount lifts are made with either polyurethane or rubber. I've had both and the poly mounts definitely transmit more engine vibrations into the passenger compartment. For that reason, I recommend you go with rubber. I have M.O.R.E. rubber torsion "Bombproof" mounts but they're not cheap. :)

1BLKJP 03-25-2007 12:46 AM

I originally got my MORE rubber bombproof mounts from Jason at Jerry is right, they aren't cheap at 125 a pair, but they are worth it.

jherrin215 03-25-2007 01:49 AM

I saw those and thought about it, but I am trying to stay under 650 bucks and do a 1 in. BL, 1 in. MML, 1.25" spacers, and a set of 33's. I just went ahead and ordered the JKS blocks from Quadratec shipped for 60 bucks.

rob5059MOD 03-25-2007 10:14 AM

I run a Brown Dog MML with no problems, I have about 10000 miles on them now.

All times are GMT -5. The time now is 06:22 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.