Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Vendor Spotlight! Great Deals for Members. (http://www.wranglerforum.com/f123/)
-   -   Poison Spyder Brawler Rockers (http://www.wranglerforum.com/f123/poison-spyder-brawler-rockers-68645.html)

DTS 11-12-2010 11:27 AM

Poison Spyder Brawler Rockers
 
Jeep JK's, especially the long wheelbase 4-door Unlimited, are extremely vulnerable to rocker armor damage on the trail. Poison Spyder Brawler Rockers™ provide the ultimate rocker armor protection while actually enhancing your Jeep's off-road capability—not to mention they look bad-ass!

http://pix.poisonspyder.com/Products...03_hft4r-M.jpg

Poison Spyder Brawler Rockers™ are two-piece "mini-boatside" style rocker armor. Each component is fabricated entirely of CNC-laser cut, precision brake-formed 3/16" plate steel. The upper piece fits the lower section of your Jeep's exterior sheetmetal like a glove, conforming to the sublte curvature of the JK and providing protection similar to Poison Spyder's JK Body Armor™. The lower piece incorporates an extremely strong rub rail that protrudes about 3" outboard of the Jeep's body tub. The top surface of the rub rail may also serve as an entry step. Below, the brake-formed 3/16" plate steel angles down and inward to form a high clearance boatside for sliding off of rocks and obstacles. Inside, an array of beefy 3/16" thick internal gussets provide ultimate strength to the Brawler Rocker™. Oval lightning holes along the length of the boatside section provide great Poison Spyder looks while allowing access to hose out mud and debris after a day on the trail. The ends of the Brawler Rockers are capped in the same 3/16" plate steel, in angled facets that allow up to a 40" tire and visually integrate with the lines of Poison Spyder front and rear JK Crusher Flares™.

http://pix.poisonspyder.com/Products...04_mNY45-M.jpg

http://pix.poisonspyder.com/Products...90_Gp27K-M.jpg

The upper piece attaches to the body tube using supplied stainless steel flat-head cap screws and nut-serts. The lower piece attaches to the upper piece also with stainless steel flat-head cap screws and easy-to-install clip-nuts. All fastener holes are countersunk for a flat surface using the flat-head hardware. Underneath, the lower piece attaches at the Jeep's body mounts. Attaching the Brawler Rockers™ in this way, along several different planes, provides triangulated strength to the entire assembly. The body-mount tie-ins ensure that they are securely integrated to the strongest structural component of the Jeep—the frame—while also allowing the Brawler Rocker™ to hug the body tub as closely as possible, and to move upward with it in the event that a body lift is installed.

http://pix.poisonspyder.com/Products...03_CEiyC-M.jpg

Brawler Rockers™ are designed to handle a serious beating! They not only provide unmatched rocker protection, but they also provide a super strong pivot point which can help you to maneuver through tight obstacles. The boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail. The protruding rub rail keeps vertical obstructions such as trees and rock walls a safe distance from the Jeep's doors and other vulnerable body parts. And when you need to change a tire or perform an extraction, the Brawler Rocker™ provides a strong, convenient lifting point for your Hi-Lift jack.

http://pix.poisonspyder.com/Products...73_yTABZ-M.jpg

Brawler Rockers™ ship as bare steel, allowing you to paint or powdercoat in the color of your choice. Note that if you have previously installed Poison Spyder's JK Body Armor, you will be able to re-use the existing nut-serts, saving a significant amount of installation time (Body Armor will have to be removed).

http://pix.poisonspyder.com/Products...71_tX4d7-M.jpg

DTS 11-12-2010 11:28 AM

Here's a video with Larry discussing the features and benefits of the new Brawler Rockers:

YouTube - Poison Spyder Brawler Rockers

DTS 12-14-2010 06:24 PM

TTT for your Christmas shopping! :D

Don't forget our December Specials where you can get FREE SWAG when you spend $100, $200, $300 or more!

DTS 01-10-2011 01:24 PM

Off-Road.com posted a nice write-up of our Brawler Rockers.

http://www.off-road.com/images/conte...ers-1-7-11.jpg

DTS 02-16-2011 01:17 PM

King Of the Hammers Proven!

http://pix.poisonspyder.com/Events-1...27_fxWwr-M.jpg

DTS 03-08-2011 06:53 PM

2-DOOR JK Brawler Rockers are READY!!
http://pix.poisonspyder.com/Products..._r5oTG-L-1.jpg
I hope to have some photos of these mounted within the next few days.
You can now order the 2-Door Brawler Rockers online from our website, or place your order by phone at (951) 849-5911, or purchase them through your favorite Authorized Poison Spyder Dealer!

AzTJ 03-08-2011 07:10 PM

TJ version?

DTS 03-09-2011 12:04 PM

Quote:

Originally Posted by AzTJ (Post 1105122)
TJ version?

No plans for it at this time. We make 3 different rocker armor products for the TJ already. Thanks!

DTS 03-14-2011 05:12 PM

Got some installed shots of the 2-Door Brawler Rockers. They actually look pretty good with the stock flares on Doug-E-Fresh's Jeep. But they'll look even better when he gets around to adding some more PSC armor :D

http://pix.poisonspyder.com/Products...69_vqc2Y-L.jpg

http://pix.poisonspyder.com/Products...00_DrkGj-L.jpg

http://pix.poisonspyder.com/Products...52_8bMix-L.jpg

http://pix.poisonspyder.com/Products...20_LYJFm-L.jpg

http://pix.poisonspyder.com/Products...21_Ktkm3-L.jpg

http://pix.poisonspyder.com/Products..._miZLf-L-1.jpg

billytheyj 03-15-2011 03:25 AM

Yj version?

DTS 03-15-2011 11:49 AM

Quote:

Originally Posted by billytheyj (Post 1117455)
Yj version?

sorry we don't but we do have 3 other types of rocker protection for the YJ. Check out our website for Rocker Knockers, Ricochet Rockers, and Rocker Knockers with Sliders. Thanks! --Dusty

YAHAHA 03-15-2011 01:04 PM

CJ version?

DTS 03-16-2011 11:03 AM

Quote:

Originally Posted by YAHAHA (Post 1118151)
CJ version?

LOL you guys are just playin' me now :D Thanks for bumping my thread!

billytheyj 03-16-2011 12:31 PM

Quote:

Originally Posted by DTS

LOL you guys are just playin' me now :D Thanks for bumping my thread!

Haha yup! On a serious note I am really starting to like your stinger bar, but that's 5th on my list.

DTS 03-22-2011 06:28 PM

http://pix.poisonspyder.com/Vehicles..._3TA7J-L-1.jpg

DTS 04-22-2011 03:04 PM

http://pix.poisonspyder.com/Events-1..._4tCrp-L-1.jpg

DTS 08-09-2011 02:41 PM

Thanks to the guys over at So Cal SuperTrucks for these great shots of the Brawler Rockers during and after install:

http://pix.poisonspyder.com/Vehicles...pyder093-L.jpg

http://pix.poisonspyder.com/Vehicles...pyder088-L.jpg

http://pix.poisonspyder.com/Vehicles...pyder230-L.jpg

http://pix.poisonspyder.com/Vehicles...pyder337-L.jpg

http://pix.poisonspyder.com/Vehicles...pyder350-L.jpg

DTS 10-04-2011 04:46 PM

Now available in steel or aluminum! 2-Door or 4-Door JK! :D

http://pix.poisonspyder.com/Vehicles...09-14840-L.jpg

DTS 12-15-2011 01:44 PM

:D

http://pix.poisonspyder.com/Vehicles...2-132454-L.jpg

http://pix.poisonspyder.com/Vehicles...2-132529-L.jpg

DTS 02-16-2012 04:54 PM

Thanks to Robert Sanchez for sending in these photos of his newly installed Brawler Rockers :D

http://pix.poisonspyder.com/Products...-CUST-10-L.jpg

http://pix.poisonspyder.com/Products...-CUST-09-L.jpg

DTS 08-13-2012 02:18 PM

We've got a bunch more room in our new shop, we're able to stockpile more inventory including literally tons of Brawler Rockers! Give us a call at 951-849-5911 if you need some 2-door or 4-door Brawler Rockers :D

http://pix.poisonspyder.com/Aroundth...7-317308-L.jpg

chrisfp88 08-13-2012 03:54 PM

Once I can afford these + lockers I'm buying them

DTS 12-10-2012 02:24 PM

Brawler Rockers look killer on the Rigid Industries JK...

http://pix.poisonspyder.com/Events-1...-12_9440-L.jpg

http://pix.poisonspyder.com/Events-1...-12_9378-L.jpg

http://pix.poisonspyder.com/Events-1...-12_9441-L.jpg

Some links for your convenience!
JK 4-Door STEEL Brawler Rockers
JK 4-Door ALUM Brawler Rockers
JK 2-Door STEEL Brawler Rockers
JK 2-Door ALUM Brawler Rockers

Glockem 12-16-2012 03:54 PM

Look awsome. I'll take mine in Aluminum please.

DTS 04-29-2014 03:48 PM

How about some customer photos of Brawler Rockers from all over the world!

They look killer on the Orange Blossom Express...
http://pix.poisonspyder.com/Vehicles...9X-1440w-L.jpg

Thanks to Rusty Everett for this great shot:
http://pix.poisonspyder.com/Products...erett01X-L.jpg

The folks at Krawl Works know what's up!
http://pix.poisonspyder.com/Products...lWorks14-L.jpg

Ethan Langford's JKU looks bad-ass with the Brawler Rockers and a full wrap of Poison Spyder armor:
http://pix.poisonspyder.com/Products...ngford05-L.jpg

Volant chose Poison Spyder Brawler Rockers for their show rig:
http://pix.poisonspyder.com/Products...olant01X-L.jpg

Richard Waitas puts his equipment through some abuse:
http://pix.poisonspyder.com/Products...Waitas02-L.jpg

Al from Kuwait runs our 2-door Brawler Rockers:
http://pix.poisonspyder.com/Products...uqayan01-L.jpg

So does Dimitar Stavrakov:
http://pix.poisonspyder.com/Products...vrakov03-L.jpg

Another cool shot from Dimitar:
http://pix.poisonspyder.com/Products...vrakov05-L.jpg

Let's see yours!

DTS 05-28-2014 06:06 PM

For your convenience, you can now purchase the Professional Nut-Sert Installation Tool we recommend for installing this and all of our products that use nut-serts, directly from Poison Spyder.

http://pix.poisonspyder.com/Products..._A-1800w-L.jpg

They are found in the new Tools section on our website, along with a few other items that may make your installation easier, such as the correct drill sizes for each of the nut-serts we use in our various product hardware kits.

We will still include the little "free" nut-sert tool we include with every product that uses nut-serts. But many of you guys know how frustrating those are to use. This pro tool isn't cheap but if you're going to be installing a couple of products that use nut-serts, you'll find it welll worth the investment.


All times are GMT -5. The time now is 09:32 PM.