Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ Tech Forum (
-   -   Can't find evap leak (

jameslee97206 11-16-2010 05:43 PM

Can't find evap leak
I have a 2001 se auto. I had the fuel pump replaced a couple weeks ago. Jeep died today, got it started and went to auto zone. Idle air control system p0505 and 2 evap codes 1 small leak detected and one large leak detected. Not sure bout p0505 coz I just replaced idle air control valve. Jeep idles high when coming to a stop then idles down. Never starts on first try always second or third if very cold. I sprayed carb cleaner all over intake and evap canister, all hoses and cant find the sob if this is my problem....Any ideas?:bottom:

jameslee97206 11-16-2010 06:04 PM

I found a vacum line disconnected, still have p0505 and p0455 codes. I think the vacume line off took care of one code. Any ideas on the other 2?

withay 11-16-2010 07:25 PM

I just had a leak - cracked "T" fitting at the line at the gas tank.

jameslee97206 11-16-2010 07:29 PM

I'm going to stick it on a smoke machine tomarrow.

withay 11-16-2010 07:36 PM

Lol that'll do it. The whole back of mine looked like it it was on fire! Good luck!

jameslee97206 11-16-2010 07:41 PM

hahaha, i'll take a pic.

withay 11-16-2010 07:45 PM

If that is where the leak is - don't unbolt the tank and then let it hang from the lines, or the shop will have to replace the fitting. And the maim fuel line. And the center cover that houses the sensor. Heehee, they felt really really bad.

All times are GMT -5. The time now is 09:43 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.