Μy (not so custom,not so stock)front bumper and winch plate
Well, i took a rect tube(6x12cm) i think 2.5"x4.5"(4mm)thick and build a front
bumper for my Tj.
For several reasons(aka law) i wanted it to be close to stock shape and size
so i reused the bumperetes only removed'em closer to licence plate to make
room for my d-rings.
I wanted the d-rings not to stick out(law?)and to have room on my winch plate to put my winch without having to raise the plate to clear the anti-sway bar,so i extended the bumper another 2" forward.
The d-rings set came with two flanges in order to clear the bumperetes
which i reused as a base for my fog lights
For my winch plate i used 1/4" which will be "sandwiched" between my bumper and the d-rings base
6 screws secure the combo on the frame(4 for the d-rings and another 2
on the front of the anti-sway bar
(Τo be continued)
Looking good so far.
Thanks a lot,your avatar looks good too!!!!!!!!!!!!!!!
P.S. I was born in Athens(not GA,GR lol)
|All times are GMT -5. The time now is 04:48 AM.|