Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   "91" AX-15 bolt up to my unkown year 4.2? (http://www.wranglerforum.com/f218/91-ax-15-bolt-up-to-my-unkown-year-4-2-a-70754.html)

StinkyMud 12-01-2010 10:42 AM

"91" AX-15 bolt up to my unkown year 4.2?
 
I have an 89 YJ that currently has a 4.2 and YES an ax-15 in it. My wrangler was originally a 2.5 and the 4.2 and AX-15 were dropped in at a later time. I have NO idea what year the 4.2 and current AX-15 are from. Anyway, unfortunately the current trans is toast and I have a lead on an Ax-15 from a 1991 wrangler that had a 4.0.

Should I have ANY problems marrying these two up to my unknown year 4.2 seeing how I currently have an ax-15 already on it??

I guess what I'm asking is there any differences between years of AX-15's to inhibit the transplant??

Ibuildembig 12-01-2010 10:47 AM

Shouldn't be a problem as far as I can see

StinkyMud 12-01-2010 10:51 AM

Quote:

Originally Posted by Ibuildembig (Post 902926)
Shouldn't be a problem as far as I can see

I was hoping you'd chime in... Any differences in the transfer cases? I have NO idea what I have on my AX-15 currently. I'm curious about the a potential 29/31 spline difference?!?!?! :confused:

Ibuildembig 12-01-2010 10:54 AM

lol, that's a first, most people prolly hope I don't chime in :)

Ummm you shouldn't have a concern since you already have a 15 in place. The smaller spline outs were pretty much on the ax4/5's and ba15's.,,which means someone changed the case when they did the motor/tranny swap originally. I think your good to go.

StinkyMud 12-01-2010 11:12 AM

Quote:

Originally Posted by Ibuildembig (Post 902939)
lol, that's a first, most people prolly hope I don't chime in :)

Ummm you shouldn't have a concern since you already have a 15 in place. The smaller spline outs were pretty much on the ax4/5's and ba15's.,,which means someone changed the case when they did the motor/tranny swap originally. I think your good to go.

lol.. You seem to be up on your building skills and parts.. So why wouldn't I
Anyhow, Yeah that's right.. I'm thinking of the BA-10's.

jgano23 12-01-2010 11:15 AM

Quote:

Originally Posted by StinkyMud (Post 902966)
lol.. You seem to be up on your building skills and parts.. So why wouldn't I
Anyhow, Yeah that's right.. I'm thinking of the BA-10's.

that's b/c he builds em big :D.

anyway, i agree. there should be no problem.

Ibuildembig 12-01-2010 11:20 AM

:wavey:
Quote:

Originally Posted by jgano23 (Post 902972)
that's b/c he builds em big :D.

anyway, i agree. there should be no problem.


StinkyMud 12-01-2010 11:26 AM

Great! Thanks (As always) for the help!!!!


All times are GMT -5. The time now is 10:06 AM.