Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Vendor Spotlight! Great Deals for Members. (http://www.wranglerforum.com/f123/)
-   -   Poison Spyder JK Evap Skid! (http://www.wranglerforum.com/f123/poison-spyder-jk-evap-skid-70957.html)

DTS 12-03-2010 10:59 AM

Poison Spyder JK Evap Skid!
 
Own the Number 1 Selling Evap Skid for the JK!


http://www.poisonspyder.com/images/p...BARE-A-600.jpg
The plastic evaporative canister located under the Jeep JK's floorboard is an important part of the Jeep's emissions and engine management system. Unfortunately, Jeep placed this unit in a vulnerable spot where it can be damaged or torn off by rocks and other trail obstacles. Poison Spyder's JK Evap Skid solves this issue by protecting the canister with a rugged skid plate.


http://www.poisonspyder.com/images/p...skid01-640.jpg

The Poison Spyder JK Evap Skid is CNC laser cut and brake-formed from 3/16" plate steel. It completely envelopes the evap canister to protect it from the bottom, front, sides and rear. The front surface of the skid is slanted like a ramp to help slide the Jeep up and over any obstacles that might reach up that far into the Jeep's undercarriage. And of course the skid features the familiar laser cut Spyder symbol.

http://www.poisonspyder.com/images/p...evapskid03.jpg


The unique installation method involves removing the stock mounting bracket and securing the canister into the skid using the provided components and hardware. This provides the added benefit of lifting the canister enough to gain an extra 3/4" of ground clearance—including the thickness of the skid itself! The JK Evap Skid comes powder coated satin black, and comes in a complete kit with hardware and install instructions.

http://www.poisonspyder.com/images/p...evapskid02.jpg
There are several products on the market that deal with the evap canister's vulnerability in different ways. Kits that relocate the canister may result in engine codes that are difficult to diagnose, or may even void your factory warranty. Other skid plate products may protect the bottom of the canister but leave the sides and front vulnerable. Only the Poison Spyder JK Evap Skid keeps the canister in its factory location, with original electrical and vapor connections intact, while fully protecting it from all sides.

Click Here for our JK Evap Skid page!

DTS 02-16-2011 12:07 PM

http://pix.poisonspyder.com/Products...41_v7b4U-M.jpg

Ageless Stranger 02-16-2011 12:11 PM

That's a nice looking unit. :)

jcf 02-16-2011 12:14 PM

They are nice & installation is easy, I got one about 3 weeks ago, piece of cake for not many $

DTS 02-25-2011 11:39 AM

Here's the one on our KOH racer:

http://pix.poisonspyder.com/Vehicles..._revMj-L-1.jpg

DTS 03-22-2011 05:32 PM

http://pix.poisonspyder.com/Vehicles..._KJ7Hu-L-1.jpg

DTS 04-22-2011 01:56 PM

http://pix.poisonspyder.com/Vehicles..._6sRS6-L-2.jpg

DTS 05-12-2011 12:47 PM

http://pix.poisonspyder.com/Aroundth...10505117-L.jpg

DTS 06-20-2011 04:46 PM

This is why you need the Poison Spyder JK Evap Skid!

http://poisonspyder.smugmug.com/Even...06-18230-L.jpg

For those who think the Evap is too far up in there to need protection, this happened on a fairly mild trail, John Bull in Big Bear. A new Poison Spyder Evap Skid is on order for this young lady, as well as a rather expensive factory replacement canister.

For just $100 protect yours with the toughest, best looking, best selling Evap Skid on the market!

DTS 08-01-2011 05:06 PM

:cool:

http://pix.poisonspyder.com/Aroundth...08-01640-L.jpg

DTS 08-09-2011 11:29 AM

:D

http://pix.poisonspyder.com/Vehicles...pyder125-L.jpg

http://pix.poisonspyder.com/Vehicles...pyder129-L.jpg

http://pix.poisonspyder.com/Vehicles...pyder131-L.jpg

http://pix.poisonspyder.com/Vehicles...pyder133-L.jpg

http://pix.poisonspyder.com/Vehicles...pyder135-L.jpg

DTS 11-17-2011 05:13 PM

:D

http://pix.poisonspyder.com/Vehicles...0-031111-L.jpg

DTS 12-27-2011 04:39 PM

It's the week between Christmas and New Year's and the Spyder Crew is still hard at work! Here's another batch of Evap Skids coming together...

http://pix.poisonspyder.com/Aroundth...2-222657-L.jpg

FYI we have confirmed here in the shop that the Evap Skid does NOT fit on 2012 2-doors without modifications to the exhaust system. Fits 2012 4-doors just fine, as well as all 2011 and older.

DTS 02-15-2012 12:01 PM

A couple more pallets of JK Evap Skids ready for powder coat. Wow we go through a LOT of these! :D

http://pix.poisonspyder.com/Aroundth...2-144035-L.jpg

DTS 04-10-2012 11:20 AM

Jake Holmes sent us these photos of his Poison Spyder JK Evap Skid installed alongside the MBRP "Off-road" exhaust kit on his 4-door. We thought these might be helpful for anyone with that exhaust kit and considering our skid and wondering about compatibility. It fits great!

http://pix.poisonspyder.com/Products...-CUST-05-L.jpg

http://pix.poisonspyder.com/Products...-CUST-04-L.jpg

DTS 04-19-2012 04:30 PM

Just can't seem to build these things fast enough! Here's another batch recently finished up and back from powder coat :D

http://pix.poisonspyder.com/Aroundth...3-284823-L.jpg

http://pix.poisonspyder.com/Aroundth...4-195109-L.jpg

DTS 08-13-2012 01:29 PM

Thanks to Elevated Off-Road for the pic :D

http://pix.poisonspyder.com/Products...-CUST-06-L.jpg

Drexelpike 09-18-2012 11:33 AM

PSC Evap Skid and MBRP Off Road on a 2-Door
 
Has anyone done this evap skid on a 2-door with the MBRP off road exhaust? Pics? Problems? Solutions?

DTS 09-19-2012 10:18 AM

Quote:

Originally Posted by Drexelpike (Post 2804540)
Has anyone done this evap skid on a 2-door with the MBRP off road exhaust? Pics? Problems? Solutions?

Drexelpike I wish I had some specific information about that product combination, but unfortunately I don't. Is there something specific about the MBRP kit that would make it likely to interfere with the evap skid?

Drexelpike 09-20-2012 01:40 PM

1 Attachment(s)
Well did the install today. The side tab was severely in the way. Had to cut off the tab attached to the skid itself and bend the top strap straight and bolt it into the side of the skid directly. This gave me the clearance needed for the muffler. After all said and done I have about 1/2 inch between the bolt and the muffler.

If there is a way to reverse that so the strap goes to the opposite side that would be a much easier install.

Attachment 161992

DTS 01-07-2013 01:53 PM

The best selling JK Evap Skid on the market! We're running another huge batch of them today--here's just one sheet of them finishing up on the laser:

http://pix.poisonspyder.com/Aroundth...7_10920x-L.jpg

Couple more installed photos...

http://pix.poisonspyder.com/Vehicles...-05_7860-L.jpg

http://pix.poisonspyder.com/Products...adHill01-L.jpg

CLICK HERE for more info, photos, pricing, and to purchase yours! Or purchase through your favorite Authorized Poison Spyder Dealer!

DTS 01-07-2013 01:57 PM

Quote:

Originally Posted by Drexelpike (Post 2812714)
Well did the install today. The side tab was severely in the way. Had to cut off the tab attached to the skid itself and bend the top strap straight and bolt it into the side of the skid directly. This gave me the clearance needed for the muffler. After all said and done I have about 1/2 inch between the bolt and the muffler.

If there is a way to reverse that so the strap goes to the opposite side that would be a much easier install.

Glad you got it worked out! Maybe MBRP should revise their product to work better with ours LOL...just kidding. Honestly we may be doing a revision to these at some point, in order to fit the 12+ 2-doors, which would likely solve this problem too, as the clearance issue with those is in the same place. :)

kramer2k 01-07-2013 03:10 PM

Howdy DTS! I'm loving all the pretty metal pictures! :D I'm looking to pick up one of these. Can you comment on its compatibility with the 2013 4-door? I have a '13 JKUR and I thought I read about some interference issue when someone tried installing a PSC Evap Skid on their rig.

DTS 01-07-2013 03:25 PM

Quote:

Originally Posted by kramer2k (Post 3195511)
Howdy DTS! I'm loving all the pretty metal pictures! :D I'm looking to pick up one of these. Can you comment on its compatibility with the 2013 4-door? I have a '13 JKUR and I thought I read about some interference issue when someone tried installing a PSC Evap Skid on their rig.

The compatibility issue you heard about was on the 12+ 2-doors. With a 4-door you should be good.

kramer2k 01-07-2013 03:30 PM

Quote:

Originally Posted by DTS (Post 3195567)
The compatibility issue you heard about was on the 12+ 2-doors. With a 4-door you should be good.

Okay, thanks for clearing that up. :thumb:

It may have been an isolated incident that was the result of an accompanying mod that conflicted with the evap skid.


All times are GMT -5. The time now is 02:12 AM.