8.8 brake lines. need suggestions
last night i just finished installing my ford 8.8 that i got from a junkyard. The M.O.R.E brackets came in yesterday so that about the time i started to measure up and weld. All of my angles that i measure worked out good and pinion angle is set good. The only problem is setting up the brakes. For now, i am using a brake hose and straped each end at the master cylinder line, and the axle line were it T's off. I would much rather has a strong setup than that. Its there any websites that have the complete brake line set up for this axle? If i get a Ford Explores brake line setup, will the tj brackets that i welded on be in the way? any advice would be a big help. I have many pics of the whole project that i will post up soon.
Last time we did one we just used the hard line from the D35 and got 2 passenger side soft lines for an 8.8. Bent it all to fit thru and around the brackets and were good to go.
|All times are GMT -5. The time now is 08:09 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.