I need some help please. I have replaced the entire Distributor, Ignition coil, CPS and still no spark at the distributor. Any ideas would be greatly welcomed.
12-12-2010 04:49 PM
Is there spark at the coil? Checked ignition switch? Looked in the Power Distribution Block and its wires? Any trouble codes with the check light? There is still lots to check before assuming the ecm is bad...
12-12-2010 04:53 PM
Haven't checked yet will do thanks. The engine turns over just nothing at the distributor. It just wouldn't start after I parked it one day and now there is no spark. Very frustrating.
12-12-2010 07:33 PM
If no spark at coil I would suspect crank trigger first
12-12-2010 09:37 PM
Agreed! First thing I always check, but: He said he replaced the CPS, I think he means a new CKP (a common typo that even I have gotten used to using for the crankshaft position sensor). Check this link for a post I typed earlier for somebody having a similar issue explaining a little ignition trouble shooting... http://www.wranglerforum.com/f8/no-spark-71930.html