Does anyone have pictures of their bumpstop extensions?? I am trying to figure out how to make them stay in and what would be good to make them out of. Anything would be greatly appreciated. Thanks
04-10-2007 03:12 PM
Just buy some. They are cheep and save yourself the frustration. If you want to make them, get longer bolts and drill the center on a piece of 1 1/2aluminum cylinder stock at whatever length you need.
04-10-2007 03:17 PM
Do they go up top inside of your coil, or on the bottom of the coil spring pad?? I know the stock is up top, but I don't see why you couldn't put an extension on the bottom pad.
04-10-2007 03:34 PM
Depending on how you do it, they can go both top and bottom. In order to do the bottoms you have to drill and tap the spring perch though. I run Currie bumpstops. I like them as in the rear they are coil retainers as well.
04-10-2007 03:41 PM
That's cool, how much were the curries?? And what size do you have with what size tires??
04-10-2007 07:46 PM
Just glue hockey pucks to the spring perch. Works great and you can add 1 or 2 based on need. I bought a sack of 12 for $10 at a sporting goods store.