Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Builders Corner (http://www.wranglerforum.com/f118/)
-   -   His and Hers tj monsters (http://www.wranglerforum.com/f118/his-and-hers-tj-monsters-73444.html)

4x4builder1 12-26-2010 06:38 PM

His and Hers tj monsters
 
Just joined and wanted to post my and my fiance's builds. I really just started on one but got such a good deal on a 2003 frame tub interior and motor(37k miles) I had to do it. First one is a 97 on a 95 yj frame with 5.5 procomp coil conversion. Already put my 600 HP sbc in it but now planning to swap out for the 03 4.0, 33"s on tj axles. Next is the 03 just picked up last week plans for full 4 link fast fuel injected 434 sbc th400 np205 new hood fenders 1 tons 38"s. Posting pics tonight

JDsDream 12-26-2010 06:46 PM

Welcome To the Forum

Sounds great, now let's see some pics.

YJjeep 12-26-2010 06:57 PM

x2 get some pics!

4x4builder1 12-26-2010 07:09 PM

http://4x4builder1.81405@uploads.photobucket.com

4x4builder1 12-26-2010 07:14 PM

http://s442.photobucket.com/albums/q...t=IMAG0025.jpg

JDsDream 12-26-2010 07:17 PM

Are you trying to post pics from a host site or directly from your computer?

4x4builder1 12-26-2010 07:21 PM

HERE'S THE 95 YJ FRAME
http://s442.photobucket.com/albums/q...t=IMAG0015.jpg

4x4builder1 12-26-2010 07:22 PM

Pphotobucket never had a problem before

Vaultzz 12-26-2010 07:23 PM

:)
http://www.wranglerforum.com/f2/this...-pic-8794.html

4x4builder1 12-26-2010 07:29 PM

http://i442.photobucket.com/albums/q...1/IMAG0037.jpg

Vaultzz 12-26-2010 07:33 PM

I see an engine :D

4x4builder1 12-26-2010 07:34 PM

http://i442.photobucket.com/albums/q...1/IMAG0104.jpg
http://i442.photobucket.com/albums/q...1/IMAG0025.jpg
http://i442.photobucket.com/albums/q...1/IMAG0015.jpg
http://i442.photobucket.com/albums/q...1/IMAG0089.jpg

Vaultzz 12-26-2010 07:36 PM

I see its a YJ frame, but is it a completely custom suspension? That looks really cool

4x4builder1 12-26-2010 07:40 PM

http://i442.photobucket.com/albums/q...1/IMAG0108.jpg
http://i442.photobucket.com/albums/q...1/IMAG0106.jpg

4x4builder1 12-26-2010 07:49 PM

It's a bolt on system by procomp 5.5" lift 4 link and track bars good system with the stock motor and 33"s

4x4builder1 12-26-2010 08:07 PM

Still need a nv355,0 np231 and driveshafts for hers

monkeee2002 12-26-2010 08:23 PM

Quote:

Originally Posted by Vaultzz (Post 946710)
I see an engine :D

I see many long nights in the shop!:eek:

Welcome to the Forum :wavey:
Looks like you've got a fun project there!

4x4builder1 12-26-2010 08:32 PM

looking for fenders and a hood for the 03 not sure if Aftermarket stuff is in the budget just yet

4x4builder1 12-26-2010 08:41 PM

Quote:

Originally Posted by monkeee2002 (Post 946842)
I see many long nights in the shop!:eek:

Welcome to the Forum :wavey:
Looks like you've got a fun project there!

Thanks I figure about 2 months more (everyday) the motor was in my 99 tahoe and the whole setup is standalone and complete so that won't take too long here's the you tube link of the tahoe to give you guys an idea what's going in the jeep this is with full exhaust (borla xr1 multicores)not open headers
http://www.youtube.com/watch?feature...&v=mnwVlab4HKY

4x4builder1 12-26-2010 09:25 PM

Selling the ballistic fab 63" Chevy spring kit with springs brackets and ballistic ubolt kit also have the ballistic torque arm with heim joint have pics up soon need the cash for a Dana 60 front and rcv shafts

redjeeper 12-26-2010 09:27 PM

Welcome Nice looking builds you got going on.

4x4builder1 12-26-2010 09:32 PM

Thanks for the warm welcome guys any advice or comments are greatly appreciated I'm new to jeeps built a monster truck and 2 suburbans and a lot more but never jeeps

bobjenkins 12-26-2010 11:07 PM

Quote:

Originally Posted by 4x4builder1
Thanks for the warm welcome guys any advice or comments are greatly appreciated I'm new to jeeps built a monster truck and 2 suburbans and a lot more but never jeeps

Nice jeeps . From what you say I think ill be asking you for advise! :)

Ted_D 12-27-2010 12:05 PM

Just for safety change those blocks so they will support weight. They arent designed to support weight stacked sideways

4x4builder1 12-27-2010 01:48 PM

Quote:

Originally Posted by Ted_D (Post 948092)
Just for safety change those blocks so they will support weight. They arent designed to support weight stacked sideways

They were pics of where I picked up the jeep in bayville nj its in the back of my trailer still haven't even touched it except to cover it

jr. 12-27-2010 04:49 PM

keep us posted with pics:D

4x4builder1 12-27-2010 06:56 PM

Here's the 14 spooled 4.10s disc brake conversion ready for truss and 4 link
http://i442.photobucket.com/albums/q...1/IMAG0054.jpg

4x4builder1 12-27-2010 07:00 PM

Won't be there long only got mounts tacked on anyway
http://i442.photobucket.com/albums/q...1/IMAG0038.jpg

4x4builder1 12-27-2010 07:10 PM

Making room for the griffin mounted the motor as far foward as possible to get a good driveline angle radiator is mounted now just no picks yet flushed the top of the grille too no latch just lockable pins
http://i442.photobucket.com/albums/q...1/IMAG0090.jpg

4x4builder1 12-27-2010 10:33 PM

These are a set of Rockwells I rebuilt and sold to this guy about a year ago they were going in the jeep but he stopped the build I'm contemplating putting a set of these in and the one tons in the woman's build (green tj)
http://i442.photobucket.com/albums/q...1/IMAG0107.jpg


All times are GMT -5. The time now is 10:10 AM.