Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ Tech Forum (
-   -   Winch and stock battery cable connectors (

samchamp 12-30-2010 07:18 AM

Winch and stock battery cable connectors
This weekend I installed a Warn M8000 on my 2005 TJ Sport. Installation went fine with no major problems. I used the stock battery connectors (like the one shown in the picture below) when connecting the pos and neg winch cables to the battery. I just added the winch cables to the screw post where the engine cables connect.

So, my question is, are these stock connectors substantial enough to handle the load of the winch over the long term or should I replace them with a more robust design connector? Thanks for your advice!!BzHwjZQEWk~...ls5vw~~_12.JPG

4Jeepn 12-30-2010 07:59 AM

I have used the stockers before. They work okay. Though I usually try to get a battery with another set of connectors.

snwchris 12-30-2010 09:27 AM

Yep they work fine, have had mine hooked up that way for about 4+ years now.

All times are GMT -5. The time now is 04:05 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.