- - starter probs
||04-17-2007 10:26 PM
hey any advice on geting the starter on my 87 wrangler square with the ring gear, i think when my distributer gear on my cam went bad the timing was too advanced, makin my engine fire against the starter possibly bending the mount now my starter just hits corner of ring gear, already replaced ring gear, thinking of making shims on engine side of starter, but with only two bolts would be kind-of cobbled
||04-18-2007 05:11 AM
welcome to WF. Someone will probably chime in, but you might get a better response in the YJ forum :)
|All times are GMT -5. The time now is 08:20 AM.
User Alert System provided by
Advanced User Tagging v3.1.0 (Pro) -
vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.