Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Builders Corner (http://www.wranglerforum.com/f118/)
-   -   KC winshield light brackets.. HELP (http://www.wranglerforum.com/f118/kc-winshield-light-brackets-help-74627.html)

Red00Tj 01-04-2011 09:59 PM

KC winshield light brackets.. HELP
 
i got some of those KC light brakcets to put 1 light on each side of the winshield and the lights i want to use are a little to deep for the bracket i know i can bolt another piece of metal to the bracket and put the light on that or weld a small piece or somthing im just wondering if anyone ran into this problem and how did you fix it?... pics would be awsome! thanks!

blkrubi88 01-04-2011 10:06 PM

What kind of lights are you using? I used some cheap slim lights and had no problems!

JIMBOX 01-04-2011 10:08 PM

:cool: I don't know what lights you're running, but

I got KC Slimlites and the brackets are perfect and don't interfere with the radio antenna, course Mine are 1 yrs old now, but there's lots of different mfg and you've just about gotta stay with the sameoh/sameoh-

http://i294.photobucket.com/albums/m...owby/001-4.jpg

These leave 2" clearance between the light back and windshield and 1" between the antenna and lite side !!

:rofl::rofl: JIMBO

Red00Tj 01-05-2011 12:01 AM

mine are HID with internal ballast... bassicly the same as these

Amazon.com: Rugged Ridge 15205.63 7" Black Round HID Off-Road Light with Wiring Harness - Set of 3: Automotive

Red00Tj 01-05-2011 12:03 AM

sorry for any confusion my brackets bolt to the bolts the hold the winshield on like on the corner

AzTJ 01-05-2011 12:10 AM

Got any pictures of them on there? I don't think you should be having any issues... could be wrong.

hannahuffster 01-05-2011 12:10 AM

Like these? About how deep are your lights? Those are old dick cepek 6" lights and most lights you get now are smaller than them...

http://i453.photobucket.com/albums/q...2-14152418.jpg

Red00Tj 01-05-2011 12:23 AM

tomarrow ill throw the brackets on there and ill hold the light up to it and get a pic

Red00Tj 01-05-2011 12:33 AM

so i just went outside to try to put the mount on and i broke my torx because the screws are so tight :( guess harbor freight tools dont cut it

Ghauto 01-27-2011 05:02 PM

Quote:

Originally Posted by Red00Tj
i got some of those KC light brakcets to put 1 light on each side of the winshield and the lights i want to use are a little to deep for the bracket i know i can bolt another piece of metal to the bracket and put the light on that or weld a small piece or somthing im just wondering if anyone ran into this problem and how did you fix it?... pics would be awsome! thanks!

Had the same issue multiple times / jeeps. Let me know if u fixed it or if u still need assistance


All times are GMT -5. The time now is 07:57 PM.