Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Builders Corner (http://www.wranglerforum.com/f118/)
-   -   4" rough country fitted..looks like a dragster!??! (http://www.wranglerforum.com/f118/4-rough-country-fitted-looks-like-a-dragster-74849.html)

birtydugger 01-06-2011 03:35 PM

4" rough country fitted..looks like a dragster!??!
 
question for the TJ boys mostly!!...my mate has a 97 TJ 4.0ltr,..has a 2" body lift and just fitted some 4" rough country coils from ebay..he said it looks like a dragster on level ground and measures (from ground to bottom of rocker) front=26.5"...and the rear 27.5"...is that normal with this brand??? does it need to settle?? we have fitted between us 6 x lifts before of various makes n sizes..3 x YJ's & 3 x TJ's...never had this before!!?..it has an ARB bumper front/rear and a winch up front and a soft-top and sits on 33"..wondered if we should add a 1"coil spacer up front to compensate?..or put sum bags of ballast in the rear help it settle?...any others with same experiences with ROUGH COUNTRY SPRINGS? it rides ok too no noises, all seems ok..but havent offroaded her yet :crash:

Mortalis5509 01-06-2011 06:24 PM

The winch and the front bumper will differently pull it down. How much does the bumper and winch weigh? Put a spacer up front to level everything out.

birtydugger 01-07-2011 03:06 PM

thx mortalis...yes we have decided to spacer the front up...there is about 150LB of weight ..so makes sense to balance it out....cheers anyway.

rubiunlimited 02-16-2011 10:32 AM

1 Attachment(s)
I installed a 4" rough country X-series and mine sits perfectly level, then again i dont have a rock bumper or winch on my jeep so that may have something to do with it.
[IMG]file:///C:/Users/DYLAN%7E1.INS/AppData/Local/Temp/moz-screenshot.png[/IMG]

rockhard98 02-17-2011 11:23 AM

Quote:

Originally Posted by birtydugger
question for the TJ boys mostly!!...my mate has a 97 TJ 4.0ltr,..has a 2" body lift and just fitted some 4" rough country coils from ebay..

Please tell me he's done more then just throw in a set of 4 inch coils (lift set up)

sammyboy 02-19-2011 02:01 PM

when i threw a 4" RC on my YJ the front dipped a little bit, definitely has that dragster look. i cant speak for tj's but if you are having problems already its only going to get worse. I would pick up some front coil spacers or even a shackle lift for the front if you can manage that without compications. dont go over an inch though.

cpisani89 02-20-2011 07:54 PM

you also need to remember that the engine is located in the front and isnt exactly light lol


All times are GMT -5. The time now is 09:03 PM.