Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   Please help! (http://www.wranglerforum.com/f274/please-help-74928.html)

medic_23387 01-07-2011 02:20 AM

Please help!
 
I bought an 07 wrangler sahara and I want to put 2in coil spacers on it but I think it might already have them on there. How can I tell. The jeeps sits level and is taller than my brother X model so I don't know what been done to it. I know the shocks and springs are stock. I don't know if they put a leveling kit on it or a full 2in kit. It does have rubber things on the top of all the springs but i don't know if they come like that stock or if they are are BB lift?

http://i1082.photobucket.com/albums/...87/photo-1.jpg

daggo66 01-07-2011 05:51 AM

It's hard to tell from that picture. The eyes can play tricks because of the way it's parked. (not on all on the same surface) At most it has a leveling kit. There are always "rubber things" on top of the springs. They are the coil spring isolators. It could be sitting higher than the X because it has 32" tires and not all X's have 32's.

InfernoGirl 01-07-2011 07:03 AM

Post a pic of the tops of the springs.....

medic_23387 01-07-2011 07:58 AM

The tire size is P255/70R/18. I am including pics of the springs sorry about quality I am at work and had to take them with my phone.

Front springs
http://i1082.photobucket.com/albums/...ontspring2.jpg
http://i1082.photobucket.com/albums/...ontspring1.jpg

Back springs
http://i1082.photobucket.com/albums/...backspring.jpg

medic_23387 01-07-2011 05:08 PM

Are those the stock coil spring isolators or a BB lift?

seadog 01-07-2011 05:25 PM

I have the same size tires and wheels on my '10. From bottom of fender to top of front tire, I have ~4.5 inches. Rear tire is ~5 inches. Your gaps don't look much different than mine. Everything is stock on my Jeep until Sunday. UPS was good to me today.

I was measuring from the outside edge, not inside the fender.

daggo66 01-07-2011 06:53 PM

Those look like stock coil isolators to me.

seadog 01-07-2011 07:47 PM

Umm... what are the part numbers on your coils? Last two numbers (not letters) tell you coil strength. Daggo taught me well.

daggo66 01-08-2011 07:04 AM

Quote:

Originally Posted by seadog (Post 973443)
Umm... what are the part numbers on your coils? Last two numbers (not letters) tell you coil strength. Daggo taught me well.


And others taught me Lets Solve the Stock Springs Question


All times are GMT -5. The time now is 05:35 PM.