So I'm out riding around in the jeep looking for things to flex my new 2.5" lift on when I notice something that can't be normal
01-08-2011 01:36 PM
Nice looks like your sway bar link. Time for upgrade
01-08-2011 01:38 PM
That's just your antiswaybar link which is not a big deal and it's easily replaced. As J10 suggests, just upgrade both links to a pair of quick disconnect links from someone like JKS which I believe are less expensive than the factory links are anyway.
01-08-2011 01:42 PM
Yep thats what mine looked like too. Nice easy upgrade and relatively inexpensive
01-08-2011 01:54 PM
Easy peesy. Hardware store has all the stuff you need also.
01-08-2011 02:05 PM
Forum member JWM1986 is selling a set of JKS discos.... Check the for sale section...;)
01-08-2011 02:14 PM
Just did mine. I needed a pitman arm puller to get the ball out of the sway bar.
01-08-2011 02:17 PM
Only problem I see there is finding the money for the new part, and the time to install it :)
01-08-2011 05:06 PM
That's easily replaced. If you want to stay stock(ish) rather than disco's, it's about $40 at O'Rileys Auto.
01-08-2011 05:43 PM
Mines stock at the moment, but since I have open diffs I'm thinking of getting a set of the disco's for mine :)
01-08-2011 05:50 PM
Originally Posted by djw97tj
...my new 2.5" lift...
That spring is for a 2.5" lift?
Oops, wandered into the TJ section - guess TJ 2.5" springs are bigger then JK 2.5" springs...
01-08-2011 07:18 PM
Cost me $33 at Autozone on Monday and I'm in the NE where everything is ridiculously expensive. Borrowed the puller from Autozone.