Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Vendor Spotlight! Great Deals for Members. (http://www.wranglerforum.com/f123/)
-   -   Poison Spyder BFH Front Bumpers for CJ, YJ, TJ & JK (http://www.wranglerforum.com/f123/poison-spyder-bfh-front-bumpers-for-cj-yj-tj-and-jk-75551.html)

DTS 01-12-2011 11:50 AM

Poison Spyder BFH Front Bumpers for CJ, YJ, TJ & JK
 
http://pix.poisonspyder.com/Vehicles..._3a23u-L-1.jpg

Poison Spyder Customs BFH™ front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH™ bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH™ bumper features an integrated winch mount and one-piece design. Customize your BFH™ bumper with several different Stinger/Bar options, Winch Fairlead Mount, and Heavy Duty Shackle Tabs.

http://pix.poisonspyder.com/Vehicles.../DSC3019-L.jpg

The optional Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper.

http://pix.poisonspyder.com/Products...-CUST-05-L.jpg

The optional Trail Stinger™ is similar in proportion to the famous Poison Spyder Trail Stinger™. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger™ extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper.

http://pix.poisonspyder.com/Products..._qNj2b-L-1.jpg

The optional Comp Stinger™ for the BFH™ front bumper matches the lines of our stand-alone Comp Stinger™s. For those getting into the more hard-core aspects of the sport, the Comp Stinger™ provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger™ extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper.

http://pix.poisonspyder.com/Events-1...06-18112-L.jpg

The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH™ bumper to result in zero loss in approach angle.

http://pix.poisonspyder.com/Vehicles.../DSC3006-L.jpg

The optional Winch Fairlead Mount is a separate piece (bolt-on, not weld-on) that mounts between your winch and the BFH™ bumper to provide a secure mounting surface for the winch fairlead (find it in the "Related Items" section below).

The JK BFH Disco Skid is an optional bolt-on skid plate to protect the factory electric swaybar disconnect motor on JK's. In stock form this motor hangs low, making it vulnerable to rocks and trail hazards. The BFH Disco Skid protects it, but also comes with hardware and instructions to rotate the motor upward, further out of harm's way. Like the BFH bumper, the Disco Skid is made of CNC laser-cut 3/16" plate steel and is designed to be a great looking, functional addition to the JK BFH bumper.

http://pix.poisonspyder.com/Vehicles...IMG8797x-L.jpg

Here's a Product Spotlight video for the BFH Front Bumper, where Larry explains a lot of the Features & Benefits:

Product Spotlight: BFH Front Bumper - YouTube

Whether you keep it simple or customize it with all the options, the BFH™ front bumper is a serious bumper for hardcore wheeling!

Click Here for BFH Front Bumper without Bar
Click Here for BFH Front Bumper with Brawler Bar
Click Here for BFH Front Bumper with Trail Stinger
Click Here for BFH Front Bumper with Comp Stinger
Click Here for BFH Disco Skid

DTS 01-12-2011 11:51 AM

All BFH Front Bumpers are now available powder-coated in black. When ordering online, simply choose the powder coat option when adding any BFH bumper to your cart. Powder coat is also available by phone order or through any of our Spyder dealers.

http://pix.poisonspyder.com/Products...17_qNj2b-M.jpg

yjkid95 01-12-2011 05:05 PM

Would those stingers really hold up if I were to put it to good use I see a small support or would you reccommend bracing them more if your to really use the stinger for its purpose?

Cons_Table 01-12-2011 05:19 PM

Quote:

Originally Posted by yjkid95 (Post 984995)
Would those stingers really hold up if I were to put it to good use I see a small support or would you reccommend bracing them more if your to really use the stinger for its purpose?

Just curious how often you plan on catching yourself from flipping over?

Lance03 01-12-2011 09:40 PM

Any chance of offering a forum group buy discount on your bad ass TJ armor? If so sign me up!

pakman55 01-12-2011 10:32 PM

Quote:

Originally Posted by Lance03 (Post 985792)
Any chance of offering a forum group buy discount on your bad ass TJ armor? If so sign me up!

x2 on the group buy.

jcf 01-12-2011 10:36 PM

Really nice bars

DTS 01-13-2011 10:14 AM

Sorry guys we don't do group buys because it would violate the pricing policy in our dealer agreements. But we do a Special Offer every month, and this month it happens to pertain to all of our bumpers. During January can get the Recovery Shackle Tabs upgrade for free, which is a $49 value. You don't have to be a member of any forum to get it, and its available directly through us or through any of our dealers.

DTS 01-13-2011 10:18 AM

Quote:

Originally Posted by yjkid95 (Post 984995)
Would those stingers really hold up if I were to put it to good use I see a small support or would you reccommend bracing them more if your to really use the stinger for its purpose?

Not sure what you mean by "really put it to good use", but these have been used on rigs from the Hammers to Moab to the Rubicon, and so far we haven't seen anyone destroy the bumper. But you can add whatever bracing you feel you need.

DTS 03-22-2011 05:39 PM

http://pix.poisonspyder.com/Events-1..._GjjJU-L-1.jpg

DTS 07-19-2011 03:51 PM

:D

http://pix.poisonspyder.com/Products...-CUST-05-L.jpg

DTS 08-08-2011 05:41 PM

:punk:

http://pix.poisonspyder.com/Vehicles.../DSC2981-L.jpg

DTS 08-24-2011 05:54 PM

:D

http://pix.poisonspyder.com/Products...house-07-L.jpg

DTS 09-02-2011 12:26 PM

TJ/LJ BFH Front Bumper with Brawler Bar :D

http://pix.poisonspyder.com/Products...ionel-05-L.jpg

DTS 11-17-2011 04:33 PM

:D

http://pix.poisonspyder.com/Events-1...06-18176-L.jpg

DTS 12-07-2011 01:08 PM

:D

http://pix.poisonspyder.com/Products...amima-02-L.jpg

DTS 02-13-2012 05:18 PM

BFH with Brawler Bar in the Stock class at KOH...

http://pix.poisonspyder.com/Products...2-053528-L.jpg

http://pix.poisonspyder.com/Products...2-053527-L.jpg

DTS 05-18-2012 10:52 AM

We've been a bit lacking on installed photos of the Disco Skid we offer for the BFH Bumper on JK's. Erik Miller (reigning King Of the Hammers) sent me these photos of his JK running the JK BFH with Brawler Bar, AND the BFH Disco Skid. Thanks Erik!

http://pix.poisonspyder.com/Vehicles...IMG8797x-L.jpg

http://pix.poisonspyder.com/Vehicles...IMG8833x-L.jpg

snochick 07-18-2012 03:44 PM

Quote:

Originally Posted by DTS
We've been a bit lacking on installed photos of the Disco Skid we offer for the BFH Bumper on JK's. Erik Miller (reigning King Of the Hammers) sent me these photos of his JK running the JK BFH with Brawler Bar, AND the BFH Disco Skid. Thanks Erik!



We have 2 on order with u but something on back order for the knocker rockers we ordered for mine is holding up shipping for the order.

We'll be sure to send pics of the pair once we get it all in. Very pleased with this bumper though. The fit was perfect and the welding was superb.

I can't wait to get the knocker rockers. The paint on those is going to end up being a focal point on the jeep. So one spyder equipped gecko album coming your way soon.

snochick 07-22-2012 04:35 PM

Got em on today, so here's a couple more pics of the skid mounted on a BFH for ya.

http://sphotos-b.xx.fbcdn.net/hphoto...38255031_n.jpghttp://sphotos-a.xx.fbcdn.net/hphoto...61487769_n.jpghttp://a4.sphotos.ak.fbcdn.net/hphot...13339432_o.jpghttp://sphotos-b.xx.fbcdn.net/hphoto...92577562_n.jpg

DTS 07-23-2012 10:48 AM

Looks great snochick! We like the 2-tone paint on those bumpers :)

DTS 04-12-2013 12:32 PM

Here's a Product Spotlight video for the BFH Front Bumper, where Larry explains a lot of the Features & Benefits:

Product Spotlight: BFH Front Bumper - YouTube

DTS 06-28-2013 06:08 PM

The Poison Spyder BFH Front Bumper has been earning some imitators lately but its still the original, best engineered, best built, best-looking super-stubby Jeep bumper on the market! Available for CJ, YJ, TJ and JK, with Brawler Bar, Trail Stinger, Comp Stinger or no stinger. Fabricated entirely of CNC laser cut 3/16" plate steel, precision-brake formed. Includes integrated winch mount, high clearance faceted design, and optional CNC machined 1" thick billet steel, high clearance recovery shackle tabs! Check out all of these configurations:

TJ BFH Front Bumper with Brawler Bar
http://pix.poisonspyder.com/Vehicles...5X-1440w-L.jpg

TJ BFH Front Bumper with Trail Stinger
http://pix.poisonspyder.com/Vehicles...0X-1440w-L.jpg

TJ BFH Front Bumper with Comp Stinger
http://pix.poisonspyder.com/Products...eKomar01-L.jpg

TJ BFH Front Bumper (no stinger)
http://pix.poisonspyder.com/Products...225-2501-L.jpg

YJ BFH Front Bumper with Brawler Bar
http://pix.poisonspyder.com/Vehicles...5X-1440w-L.jpg

YJ BFH Front Bumper with Trail Stinger
http://pix.poisonspyder.com/Products...pscomb12-L.jpg

YJ BFH Front Bumper with Comp Stinger
http://pix.poisonspyder.com/Products...-CUST-01-L.jpg

YJ BFH Front Bumper (no stinger)
http://pix.poisonspyder.com/Products...-A-hires-L.jpg

DTS 06-28-2013 06:10 PM

And still more!

JK BFH Front Bumper with Brawler Bar
http://pix.poisonspyder.com/Events-1...DSC_0202-L.jpg

JK BFH Front Bumper with Trail Stinger
http://pix.poisonspyder.com/Vehicles...402_273X-L.jpg

JK BFH Front Bumper with Comp Stinger
http://pix.poisonspyder.com/Events-1...615_2612-L.jpg

JK BFH Front Bumper (no stinger)
http://pix.poisonspyder.com/Products...-CUST-01-L.jpg


CJ BFH Front Bumper with Brawler Bar

http://pix.poisonspyder.com/Products...-A-hires-L.jpg

CJ BFH Front Bumper with Trail Stinger
http://pix.poisonspyder.com/Products...604-3519-L.jpg


CJ BFH Front Bumper with Comp Stinger

http://pix.poisonspyder.com/Products...-A-hires-L.jpg

CJ BFH Front Bumper (no stinger)
http://pix.poisonspyder.com/Products...mbetta01-L.jpg

DTS 08-21-2013 12:09 PM

The Poison Spyder BFH Front Bumper provides the best clearance possible for your Jeep! Check out the approach angle on Lance's JK. With the stock JK bumper, or just about any other aftermarket bumper, his tires never would have been able to get this close to the obstacle in order to get a grip and pull the Jeep up and over.

http://pix.poisonspyder.com/Products...62X-1440-L.jpg

Here are a couple more recent additions to our BFH Bumper photo galleries...

Thanks to Al from Kuwait, for this shot of his JK with the BFH Bumper with Brawler Bar:
http://pix.poisonspyder.com/Products...uqayan05-L.jpg

Thanks to Branden Ludkowski for this shot of his JK Unlimited with the BFH Front Bumper with Comp Stinger:
http://pix.poisonspyder.com/Products...idowJK02-L.jpg

Here's Mike Goshgarian's TJ with a BFH Front Bumper with Comp Stinger:
http://pix.poisonspyder.com/Products...garian01-L.jpg

The BFH Front Bumper with Trail Stinger on our "Cream Puff" TJ:
http://pix.poisonspyder.com/Events-1...615_2409-L.jpg

The BFH Front Bumper with Brawler Bar on Papa Smurf:
http://pix.poisonspyder.com/Events-1...DSC_9454-L.jpg

WheresYourPlayGround 07-24-2014 12:38 PM

Could someone give me the denentions of everything i would need to cut myself to build my own for a custom look please and thanks

DTS 07-25-2014 11:03 AM

Quote:

Originally Posted by WheresYourPlayGround (Post 12179145)
Could someone give me the denentions of everything i would need to cut myself to build my own for a custom look please and thanks

If you have the skills to fabricate your own bumpers, which we do encourage, then you should have the ability to take your own measurements and develop your own design. Best of luck with your project.

pacu44 07-27-2014 09:14 PM

When going to order a JK BFH™ Front Bumper with Comp Stinger™ the only FINISH option is BARE... Powder Coating available?

DTS 07-28-2014 09:27 AM

Quote:

Originally Posted by pacu44 (Post 12248498)
When going to order a JK BFH™ Front Bumper with Comp Stinger™ the only FINISH option is BARE... Powder Coating available?

Yeah bare is all we offer on bumpers. Thanks,


All times are GMT -5. The time now is 08:11 PM.