Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   Windshield offroad light install write up? (

auburnman 01-21-2011 10:49 PM

Windshield offroad light install write up?
Anybody got a good write up on how to install a set of offroad lights on the windshield hinges using the stock fog light switch?

OKLAHOMA_TJ 02-15-2011 09:22 PM

im looking for this also.....

Lance03 02-15-2011 09:50 PM

Heres what I did. I used KC replacement fogs on the bumper, 55w. Still use factory harness.

130w KC long range Slimlites on the windshield. The beam from the fogs is to wide to mount on the windshield, you'll get to much glare to be useful. You gotta get pencil beam.

Running the harness isn't too hard. I drilled a hole thru from the engine compartment to the cowl and ran the light wires and switch wires, the switch wires were fished into the cab on the drivers side, there is a large harness and grommet, push wire into cab.

As for the light wires, I drilled 1/4" holes in the cowl panel, alot of people dont like to drill holes in their rigs, but it looks really clean.

Hold on, I'll run outside and take a pic

Lance03 02-15-2011 10:10 PM

5 Attachment(s)
Heres some pics

All times are GMT -5. The time now is 06:53 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.