Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK Tech Forum (http://www.wranglerforum.com/f202/)
-   -   Drive Shaft? (http://www.wranglerforum.com/f202/drive-shaft-77273.html)

BillH3 01-24-2011 03:40 PM

Drive Shaft?
 
If i put 4 inches of lift on my 2010 Jeep wrangler 4 door with 35inch tires will i need to replace the OE Drive shafts or will the OE still work fine?

JakeRupp 01-26-2011 01:41 PM

It would be best to replace it. OE will work fine for a little longer, but it'll be more safe and reliable if you go ahead and replace.

ZOMB1E 01-26-2011 03:13 PM

Go with a 3" lift. It will clear 35s and wont leave your stock driveshaft at a critical angle.

E64RIT 01-26-2011 07:59 PM

agree w/ zombie... i gotta zone 3"clearing 295/70/18's (equal to a 34) w/ no problems and didnt have to do anything to the drive shafts or even the gearing for that matter.


All times are GMT -5. The time now is 06:15 AM.