Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   Oil dipstick tube removal (http://www.wranglerforum.com/f218/oil-dipstick-tube-removal-77674.html)

CJ7GoldenEagle 01-27-2011 03:20 PM

Oil dipstick tube removal
 
Can anyone tell me how to remove the engine oil dipstick tube? The one I've got is rusted on the inside and I'm definitely wanting to replace it.

Chris Anderson 01-27-2011 07:56 PM

On what engine?

Garyk 01-28-2011 11:02 AM

Some have a small bracket holding them in place but as far as I know , they are all pressed into the block.

CJ7GoldenEagle 01-28-2011 02:21 PM

Quote:

Originally Posted by chris anderson (Post 1018651)
on what engine?

4 cylinder

spideyjeep 01-28-2011 02:47 PM

Quote:

Originally Posted by Garyk (Post 1019673)
Some have a small bracket holding them in place but as far as I know , they are all pressed into the block.

x2

Chris Anderson 01-28-2011 04:04 PM

Like Gary said then if there is not a bracket coming off the tube then it's just pressed in. On my 6cyl there is a bracket that comes off and is held to the block by a reverse torque bit. It's a stud for a few grounds.


All times are GMT -5. The time now is 01:02 AM.