Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ General Discussion Forum (http://www.wranglerforum.com/f290/)
-   -   Looking for a couple original parts... (http://www.wranglerforum.com/f290/looking-for-a-couple-original-parts-77787.html)

opdave 01-28-2011 12:30 PM

Looking for a couple original parts...
 
...in good working condition, of course.

Need the factory style volt meter guage, factory style clock, and a source for the factory style bulbs that go behind the guage cluster. I've searched and oly found links to the LED bulbs.
Not sure what years were interchangable but mine is a 1990.
Thanks!

dodd9966 01-28-2011 12:43 PM

Quote:

Originally Posted by opdave
...in good working condition, of course.

Need the factory style volt meter guage, factory style clock, and a source for the factory style bulbs that go behind the guage cluster. I've searched and oly found links to the LED bulbs.
Not sure what years were interchangable but mine is a 1990.
Thanks!

The gauges you are looking for are part of an entire cluster which includes the clock oil pressure volts and water temp I've got the whole cluster if u are interested the bulbs can be picked up at your local auto parts store

opdave 01-28-2011 01:01 PM

Quote:

Originally Posted by dodd9966 (Post 1019866)
The gauges you are looking for are part of an entire cluster which includes the clock oil pressure volts and water temp I've got the whole cluster if u are interested the bulbs can be picked up at your local auto parts store

Thanks for the reply. I'm aware they are part of a cluster and I've had mine all out recently. I replaced the circuit board and damaged my volt meter in the process. My clock has a broken off screw in one of the leads.
Do all the guages work properly in your cluster and is the lens cover intact?
What do you want for it?

JMWinPr 01-28-2011 03:07 PM

Will the Instrument cluster from a '89 fit a '95. I too am looking for a working clock.

dodd9966 01-29-2011 08:35 AM

The lens is in good shape the factory wiring to the clock shorted out but the clock will still work if you hook it up to a 12v source so basically You just need to run a ground and a power wire for the clock all the other gauges work fine

dodd9966 01-29-2011 08:38 AM

Quote:

Originally Posted by JMWinPr
Will the Instrument cluster from a '89 fit a '95. I too am looking for a working clock.

I think the 95 had a different style of gauges but it should work if I am correct the 4wd light is part of that cluster and on a 89 its on the steering column area I could be completely wrong though


All times are GMT -5. The time now is 11:53 AM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.