Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   1993 wrangler headers (http://www.wranglerforum.com/f218/1993-wrangler-headers-78531.html)

Buster.D 02-02-2011 07:35 PM

1993 wrangler headers
 
Hi. I have been workin on a 93 wrangler i bought some months back and i was wondering has anyone here put headers on theirs? Mine has a 4.0 v6 engine and i was wondering if the headers would make a big difference for it. I was thinking about gibson cermaic headers, they run around $550.00 or so. Thanks.

89JEEPYJ 02-02-2011 07:39 PM

is ur truck a auto or manual. i have a auto and it was a true pain in the ass to install them, it made very little sound change(i think) i changed the muffler when i changed the headers so i dont know how much different it sounds. all i know is with the new headers i cant run a cat b/c it clogs up in a solid 10 minutes and then the truck stalls and wont run. ur better off going to a exhaust place and having them build them for u

Buster.D 02-02-2011 07:57 PM

Its a standard. I already put a high flow cat and magna flow exhaust on it, along with a cool air intake system. I was just wondering if i would actually get some more out of it if i put on the headers.

89JEEPYJ 02-02-2011 07:59 PM

nope u wont get anything thats really noticable. only thing u might get is more sound

60mg 02-02-2011 08:37 PM

Quote:

Originally Posted by buster.d
hi. I have been workin on a 93 wrangler i bought some months back and i was wondering has anyone here put headers on theirs? Mine has a 4.0 v6 engine and i was wondering if the headers would make a big difference for it. I was thinking about gibson cermaic headers, they run around $550.00 or so. Thanks.

v6?

89JEEPYJ 02-02-2011 08:43 PM

lol ovs its a inline 6 but its ok

mnypitjeep 02-02-2011 09:09 PM

You mean header, not headers. It is a single header, but from what I have read it looks like there isnt enough of a gain to justify the cost.

89JEEPYJ 02-02-2011 09:12 PM

ya i personally did it, it was annoying to stall since i have a auto and it hits the shifter linkage, and it keeps cracking more and more, and im to lazy to change it using borlas life time warranty

Buster.D 02-02-2011 11:20 PM

i know they do great on a v8 because i had cermaics put on my 06 tundra. But i have never put them on a 6 cylinder and thats why i am curious to as if anyone has gone thru it already. On my tundra i gained 35 hp and better sound along with another 3 to the gallon. as for a 6 cylinder, im in a dark area as this is my first.

Ibuildembig 02-02-2011 11:37 PM

I'm gonna do one, but only because its gonna be a stroker 6


All times are GMT -5. The time now is 01:52 AM.