- - TPS Voltage
12-21-2005 08:49 PM
I am looking for the the correct voltage setting for the TPS on a 97 wrangler 2.5L :confused:
12-22-2005 11:08 AM
I'm not sure what you're asking for, as you don't "set" the voltage for or coming out of the throttle position sensor.
12-24-2005 03:49 AM
The tps module is bad in my jeep and I was told that I would be able to change the module but I need to know the correct voltage setting or I would have to take it to a shop to have it properly set because the voltage ie not fixed
12-24-2005 10:48 AM
I assure you that the TPS is a simple remove & replace module. It has no settings on it that need adjusting or setting.
12-24-2005 01:58 PM
yeah whoever told you that is full of something. replacing the tps requires about 5 minutes and the right torx bolt, which is a T25 if i'm not mistaken.
12-26-2005 04:57 PM
Thanks guys you have been a great help I went to the Local jeep dealership and they told me the same thing thanks