I have an Rough Country 3.25 inch suspension lift. If I were to run 2 inch spring spacers to gain a little more clearance, what else would I need. I understand I would need shocks, but would I need anything other than that? Thanks! :thumb:
02-09-2011 08:55 PM
rough country's 3.25 inch lift is 2.5" spring and 3/4" spacers..i wouldnt stack spacers
02-09-2011 08:56 PM
Then you would have to get rid of the .75" spacers to put in the 2" and would be sitting at 4.5" You would definately need control arms, extended sway bar links, SYE and drive shaft so you don't get driveline vibes, and probably adj front and rear trac bars unless you already have them, maybe brake line extentions and longer breather lines for your axles.
02-09-2011 09:03 PM
So, I would basically need a whole new lift kit. I just bought this lift kit so, I think I'll stick with the 3/4 spacers I got for now.