Flaky Dimmer switch
Okay, so I decided to try to fix the infamous flaky dimmer switch. What would happen is, you can only get the dash to light in one position. I figure I have a degree in Electronics no biggie. Well, mine can't be fixed. Due to water leaking into the dash and into the switch, the rheostat is actually missing the Copper inside that connects to all resistive elements.
If I was desperate and highly motivated i guess i could get some copper and cut it to make some new traces and epoxy them onto the ceramic pad. unfortunately the time to benefit ratio is not favorable. I did the next best thing. I soldered what elements were left together to increase the sweet spot.
Just a warning for those wondering if this is worth it.
|All times are GMT -5. The time now is 12:45 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.