Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Replacement Terminal Pins ? (http://www.wranglerforum.com/f282/replacement-terminal-pins-80221.html)

wbrowand 02-14-2011 10:42 AM

Replacement Terminal Pins ?
 
I've purchased the wiring harness for a Hardtop which I recently obtained. The harness comes complete with everything you need, unfortunately, I broke the terminal pin on the C301 connector (Rear Window Defogger Circuit-C15, 12 ga., B/W) which plugs into D5 location on the C301 connector. Does anyone know how to identify this terminal pin part number and where I can get replacement pins? I may have to just splice it into the mating wire but would rather fix it right.
Thanks,
wb
2005 TJ, Rubicon, Unlimited

Ctflyer 02-14-2011 06:07 PM

I just went through the same thing. I put a LSX in my TJ and wanted it to look stock. I went to a junk yard and cut out an entire fuel box. Buy yesterday while at O'Reileys looking through their Help/Dormin catalogue I saw they have the terminals. Hope this helps

wdjenks 02-14-2011 06:23 PM

If I remember correctly Framatome (FCI) makes that connector and terminal (Female conn# 04707309 should give you the mate and terminal #). I am having trouble getting into their website right now. You may be able to contact them for a sample. OR like Ctflyer said, O'Reily's or a small electronics store. Sometimes they have the terminal you would be looking for but with a little different grip at the crimp.

wbrowand 02-15-2011 07:59 AM

Thanks for the responses.
 
Super! O'Reilleys is my next stop. Thanks guys
w

technology_tactics 04-09-2014 02:14 PM

C301 Connector Pins
 
Wow! I needed the smaller pins for the C301 connector. Ended up buying a universal headlight socket and using the pins. It isn't an exact fit, but it did the job. The pin retaining clips didn't match up, but the long retaining bar holds them in just fine.

Part number is 84785, or 9008. From Dorman Products.

Price was around $7.50, and it had three pins.


All times are GMT -5. The time now is 06:24 PM.