So I did an experiment with both today. In the back I did one side with rustoleum truck bed liner spray can and the Hurculiner roll on. Wow the spray kind does ok but the can seemed to spray heavy and cause drips. It also is hard to work around tight spot and you have to do lots of taping off. With the roll on stuff man it's great. Easy to apply and you can really do one coat depending on how your using the back.
So all around roll on stuff is the way to go. Use the spray for touching up when you get nicks and scratches.
02-20-2011 05:51 AM
I used spray for the front end (fender tips, bumper, Grill and windshield frame) because I wanted it a little thinner anyway. If I do the tub I will go roll on since I think the thicker would be better for wear.
02-20-2011 05:58 AM
I used Herculiner on my tub. I took what was left over an poured it into each of the floorpans. My floorpans are 1/2" thick.
02-20-2011 03:14 PM
i used duracoat rather than herculiner... i tried to spray on the duracoat, but even after thinning it down more than was recommended, it just wouldn't go. i used a roller and some of those foam paintbrush looking things for the tight corners- worked great!