Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Vendor Spotlight! Great Deals for Members. (http://www.wranglerforum.com/f123/)
-   -   Rough Trail Rear CV Drivesahft for '97~'02 TJ (http://www.wranglerforum.com/f123/rough-trail-rear-cv-drivesahft-for-97-02-tj-83066.html)

AOR 03-04-2011 11:34 AM

Rough Trail Rear CV Drivesahft for '97~'02 TJ
 
Shipped in the lower 48 US for $370.40 (CA residents add $27.72 tax).


http://www.crownautomotive.net/mm5/g...VTJ-SYE231.jpg


Fits:

* Jeep Wrangler (1997-2002); Rough Trail Heavy Duty; Rear - Used with SYE-231 Slip Yoke Eliminator Kit; 16.5" Long.

* Heavy Duty, longer splined shaft for higher lifts.
* There are 2 sets of measurements on this shaft. 15.5" collapsed and 20.5" extended.
"Safe or recommended lengths:" collapsed 16.0" and extended 18.25"

12 month/12,000 mile warranty (mfg defects etc, etc).


PM me your name, billing and shipping address, phone number, email address (for PDF receipt) to order. I will call you for CC info.

Thank you very much. I am truly grateful for your business.

Namaste,

Allen

NHrubicon 03-04-2011 11:48 AM

I don't need one now, but since the front had to be replaced last year I might as well check....will this fit on the 2003 Rubicon (automatic)with 4" lift?

TJe0454 03-04-2011 02:02 PM

do u guys have package deals for sye kits (cv, sye, rear UCA's)?

AOR 03-04-2011 06:11 PM

Quote:

Originally Posted by NHrubicon (Post 1096394)
I don't need one now, but since the front had to be replaced last year I might as well check....will this fit on the 2003 Rubicon (automatic)with 4" lift?

The Rubi has a flange and this one is setup for a 1310 fixed yoke (as per the picture). I am not positive if the Rubi flange/cv joint is 1310. If so, then you should be able to take the flange off and put it on this unit. More research would be necessary for me if I was purchasing it.


Quote:

Originally Posted by TJe0454 (Post 1096628)
do u guys have package deals for sye kits (cv, sye, rear UCA's)?

No specific kit. What I can do is the SYE, CV shaft, and rear adjustable UCAs from Rock Krawler for $820 shipped.

http://www.rockkrawler.com/images/RK02323TJ_03.jpg


Thank you both. I am very grateful for your business.

Namaste,

Allen

boondocks89yj 04-06-2011 06:25 AM

Quote for cv driveshaft for 89 yj auto 4 1/2" lift? I have an np231j with a sye already installed that I picked up I just need a driveshaft now. What is your lead time on the part and how would you ship it? zip is 76131

AOR 04-06-2011 11:02 AM

Quote:

Originally Posted by boondocks89yj (Post 1160764)
Quote for cv driveshaft for 89 yj auto 4 1/2" lift? I have an np231j with a sye already installed that I picked up I just need a driveshaft now. What is your lead time on the part and how would you ship it? zip is 76131

What yoke are you running on the axle (1310/1330)? If you are running a 1330, then you will need a 1310 yoke and a nut. What is the measurement at ride height and full weight on the tires. Measure C/L ~ C/L on the u-joints. As long as those measurements fit within the parameters listed above, and the yoke issue is not a concern, then I would think you should be okay.

Lead time on this shaft, if it will work for you, is next business day shipping (UPS) at current stocking levels.

Thank you very much. I am truly grateful for your business.

Namaste,

Allen


All times are GMT -5. The time now is 07:31 PM.