Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Rear Seat Belt Conundrum (http://www.wranglerforum.com/f282/rear-seat-belt-conundrum-83885.html)

Sun Dog 03-09-2011 12:59 PM

Rear Seat Belt Conundrum
 
OK, I've searched everywhere. When installing rear seat belts for an 02 TJ, do you need to put lugs on the bolts, or is screwing in the bolts sufficient? Doesn't sound secure to me without the lugs.:confused:

Cons_Table 03-09-2011 01:04 PM

I know in my 99, the holes are threaded in the floor as well as the part that bolts to the roll bar...if your jeep has these set up the same way, I would assume there is no need to put nuts on the bolt.

Sun Dog 03-10-2011 08:58 AM

That's what I was thinking. I have the same thing, threads on the floor, the fender and on the roll bar. Thanks. You're one of the few people I know of who has actually done this, or at least the ones on this forum.

Cons_Table 03-10-2011 09:02 AM

Quote:

Originally Posted by Sun Dog (Post 1108826)
That's what I was thinking. I have the same thing, threads on the floor, the fender and on the roll bar. Thanks. You're one of the few people I know of who has actually done this, or at least the ones on this forum.

No problem. I figured it out when I pulled the mount in the floor for my rear seat and putting roll bar pads on I had to remove the rear seat belt.


All times are GMT -5. The time now is 01:55 PM.