Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ General Discussion Forum (http://www.wranglerforum.com/f290/)
-   -   95 2.5 liter Wrangler (YJ) questions!! (http://www.wranglerforum.com/f290/95-2-5-liter-wrangler-yj-questions-840465.html)

kyjeeper95 08-10-2014 12:53 PM

95 2.5 liter Wrangler (YJ) questions!!
 
I've had my 95 jeep in a shop for over a year. Now it's finally being pieces back together after having the engine rebuilt and every place I have ordered a distributor from has given me or the shop the wrong one or it's broken when we get it. I've been screwed around on this for a while now and we are down to installing the distributor, exhaust and intake Manifolds and reconnecting he wire loom/ harness. But every place that I try to order a new ( even reman ) distributors send the shop one with a cap for a 6 cylinder. I don't know a lot about engines, but I was told that was the right distributor I just needed a cap for the 4 cylinder. Is this true for the 2.5 liter?? The parts stores around here all show the same part number for the 2.5 and 4.2 saying only the cap needs to be changed? I live in Louisville KY and have as is aid been screwed over for a while on this, it was supposed to be a quick engine swap but the used engine I bought was stolen then the owner of the business had my engine rebuilt but he didn't have the cash to pay and the engine sat in the machine shop for nearly a year and now a stupid distributor issue is the only thing holding up the completion. Any input would be great!! Thanks

0III0forlife 08-10-2014 01:10 PM

www.rockauto.com.

1995 YJ 2.5L I4 distributor. Part # DST4694. $54.79 Includes cap and rotor.

Beer Belly 08-10-2014 05:09 PM

Screw the local idiots in the parts stores...they are wanna-be mechanics who can't do it so they sell parts from a 'puter! I have more problems with these jokers. Bunch of Bozo's!

I agree with 0lll0, rock auto or quadratec or Morris4x4. Here is the parts catalog for your Jeep from morris. Use the CORRECT part # & do an online search for the part.

http://www.jeep4x4center.com/jeep-pa...ts-Catalog.pdf

kyjeeper95 08-10-2014 05:24 PM

I need this together and running in 3 days...... Today was supposed to be the day it was completed but again distributor issues. Wild I even be able have the part from these places in hand tomorrow? I found a rebuild kit because the only thing wrong with the one I have is the bushing is worn out and there's to much play for my comfort.
I think rebuild may be the best fix for right now and then once it's running and I can get a job I can order a new one. What's the opinion out there?

kyjeeper95 10-07-2014 02:00 AM

Last Friday my transmission went out (ax/5). I was driving and slowed to take a right at the light I front of the shop that had my jeep for 18+ months......
Well it wouldn't go into gear, any gear. I finally got it to go into 2nd and nothing..... I only had pull when in 4WD HI. Then nothing. You can shift through gears without touching the clutch. No reverse either but the thing that worried me is once I got it to my place and took the boot off the gear shift (cut it off in frustration) my boss from work dropped by to check it out.... He notices that there are only 3 bolts holding the tranny to the engine block and one was broken ( they were all standard bolts instead of the black or gold 5-10s that are tempers for repeated and extended high torque)
And they' weren't the right off.... When I press the clutch down the tranny separates nearly a half inch from the engine! Actually the clutch is pushing the engine I guess and when it was being towed back it was grinding and smelled like brakes that have a locked up caliper!! I haven't been able to drop the tranny yet but it looks bad. I drained a little fluid and it looks like dark brown paint with fine metal flake along with some small nugget pieces, I'm hoping it's nothing serious but with my luck it's going to need rebuilt or replaced!! If anyone's got a AX/5 for a 95 Wrangler that'd let me know . I'll be waiting for some input!!!! Thanks

rdc401 10-07-2014 07:18 PM

Find you a ax15


All times are GMT -5. The time now is 08:52 PM.