03 TJ with 1000's of build pics!!
I was on Jeepforum.com for a while and decided to venture out to other forums to share my experiences with my build. I have a 2003 TJ which I have been building since 2005. I have a build thread on JF, and I know how much everyone likes pictures, so since 05, I took pictures of as everything I did to my Jeep since 05. I will use this thread as my build thread as well to post pics, ect. I hope everyone enjoys the pictures.
And yes, I do wheel her, and Yes, I do like to keep her clean. I have a small detailing business, and I love when she shines. Any questions please ask. Thank you. :thumb::thumb:
My Build on JF with 1000's of pictures. :thumb:
2003X TJ Build !! - JeepForum.com
2003 Patriot Blue X
5 Speed Manual
Soft / Hard Top
4" Rough Country Series II
1" M.O.R.E. Body Lift
1-1/4" Spacers Front
Rough Country 2.2 Shocks
Rough Country Quick Disconnects
Rough Country Front Adjustable Track Bar
Rough Country Rear Adjustable Track Bar
Rough Country Rear Bar Pin Eliminators
Rough Country Rear Upper Adjustable Arms
Teraflex Rear Lower Shock Relocate for Ford 8.8
Skyjacker Steering Stabilizer
Currie Heavy Duty Steering
Crown Automotive Ball Joint Kit
Smittybuilt XRC-8 Winch
Rough Country Winch Mounting Plate
ARB 3/4 D-Rings Front
ARB 3/4 D-Rings Rear
Tow Hooks On Rear Frame
48" Hi Lift
Rugged Ridge Expandable Shovel
Fold Up 4-Way Lug Wrench
Axles / Drive line:
Rugged Ridge Slip Yoke Eliminator
Tom Woods Driveshaft
Crown Automotive 39 Tooth Speedo Gear
35x13.50x15 Toyo Open Country MT
15X10 American Racing Outlaw II
35X12.50X15 BFG KM2 Spare
Old Tires are 33x12.50x15 BFG MT & 33x12.50x15 BFG A/T in most of the pics.
Engine / Exhaust
INSYS-USA Intake System
Quadratec Extreme Duty Battery Terminals
Air Raid Throttle Body Spacer
Lou's Custom Exhaust 2 Chamber Muffler
Magnaflow High Flow Catalytic Converter
Duralast Yellow Top Battery
Mopar Engine Block Heater
Custom Front Bumper - 4Custom Light Tabs,bumper is designed out of 5"x2"x3/16" steel tube, ends of the bumper are capped with 1/4 inch tabs are CNC plasma cut out of 1/4 inch plate, The d-ring mounts are machined out of 3/4 inch plate, tubes are mandrel bent from 1 3/4 .120 wall DOM. The overall width of the bumper is 52 inches.
Custom Rear Bumper - 2 LED Back up lights, The Bumper is 54 inches long by 5 inches high. It is 2 inches wide, The square tubing is 2" X 2" by .120 wall thickness. With swing away tire carrier.
Smittybilt Rocker Rails
Off Road Only LED Lite DOTS
Off Road Only LED Plate Lite
Jeeperman LED 3rd Brake Light
Bushwacker 6" Pocket Flares
Bushwacker Trail Armor Pockets (removed)
4 - KC Daylighters
KC Daylighter Windshield Mounts
Hella 500 Driving Lights
Sylvania Silverstar HeadLamps
3/4 Mini Amber LED Side Markers
Smittybilt Hood Scoop
B&M T- Handle
Jeep Rubber Floor Mats
Kilby Dash Mod Pod
Auto Meter Air/Fuel Gauge
Auto Meter Single Pillar Pod
Cyberdyne Volt Gauge
Cyberdyne Amplifier Temp Gauge
Cyberdyne Outside Temp Gauge
Cyberdyne Vacuum Gauge
Rough Country Grab Handles Front
Quadratec Black Grab Handles Rear
4 Blue Toggle Switches
Daystar Vent Switch Panel
Daystar Blue Rocker Switches (2)
Audiovox Sensor Alarm System
Window Tint 20% Front
Hardtop Tint 5%
1.5" Seat Lifters
2005 Leather Shifter Boot Mod
Rampage Adjustable Door Straps
Overhead CB Rack
Cobra CB Radio
MaxTrac 16 CH PD Radio
Jensen in dash DVD/ HD Radio Player
Infinity Kappa Speakers In Dash
Alpine SPS-500 5 1/4" Type S Speakers in Roll Bar
Alpine SPS-500 5 1/4" Type S Speakers in Mod Pod
Select Increments Mod Pod Under Doors For 5-1/4" Speakers
Rockford Fosgate 1000W Capacitor
Alpine Mono M-500 V-Power Amplifier
Custom Made Box For Two 12" Sub woofers
I get lots of questions about my exhaust, so here is a video:
Few pics of her:
Nice Jeep, welcome to the forum!
That is one hell of jeep! Welcome to WF! :wavey:
Thank you. I took great pride in building it.
Looks good, makes my pockets wana be empty... Oh wait they already are!
Nice jeep mate
Welcome to WF. :cool:
INSYS-USA Intake System
I have a question about you INSYS-USA Intake System? do you like it? any more or less power or gas mileage.
Salutations!! Nice shortyy you got there!!!
Have done so much since last march. Added a long arm kit, air conditioning, ect!
Nice to see ya over here. Need some ProTeK vinyl on that bad boy!
Welcome to the Forum
I thought you said you had been working on it. Is that all you have done? Nice rig man.
Welcome Aboard! :wavey:
Deeper pockets than I have. Let me know when your ready to sell it.
Thanks for sharing:D & welcome to the WF!
|All times are GMT -5. The time now is 07:39 PM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.