Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   92 YJ Clutch Slave Cylinder Blew and Line Leaking (http://www.wranglerforum.com/f218/92-yj-clutch-slave-cylinder-blew-and-line-leaking-84596.html)

SKYOFSCORPIONS 03-14-2011 03:56 PM

92 YJ Clutch Slave Cylinder Blew and Line Leaking
 
So my internal slave cylinder blew last week. I took the Jeep to a local shop I use and they said I might as well replace the clutch as well since it's in just "ok" condition. I have no clue when or if this was last replaced, I've had this Jeep for a month now and it is lifted 4" with 33" tires. The big problem though is the shop says that the metal line that goes from the master to the internal slave cylinder is leaking and needs to be replaced. They say that it's discontinued and very hard to find, so they are looking around. I've yet to find it in some of the Jeep parts websites. I thought I would post here to see if anyone knows where to get one. Any help is appreciated, I would like to start driving the Jeep again soon!

Jeepin91YJ 03-14-2011 07:10 PM

Well here in Colorado we have a place called FNJEEP that carries everything for jeeps. I found stuff the dealer can't get. They might be able to ship to you. Number is 719-634-0666 or toll free at 888-282-8828. Or try the email but not sure how well that works now days www.fnjeep.com good luck.

Jeepin91YJ 03-14-2011 07:12 PM

Oh and they are closed Sundays and Mondays but sometimes you get lucky on Monday and the owner is there. His name is Thomas hackle but the other guy to talk to is Ed.

SKYOFSCORPIONS 03-14-2011 08:54 PM

Thanks!

MellowYellow89YJ 03-14-2011 08:58 PM

You might look into swapping in the external slave cylinder... Parts are easy to find, and replacing will no longer require pulling the tranny.


All times are GMT -5. The time now is 01:17 PM.