Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ Tech Forum (
-   -   Body lift removal options? (

TxFireman1972 06-02-2007 08:44 PM

Body lift removal options?
Just bought our first Jeep yesterday. Its a 2000 model Wrangler Sahara. The only thing I dont like is it has a body lift on it. I CANT STAND body lifts.

I want to know what options I have to pull off the body lift and keep the same height. It already has 285/75/15's on it so I have to clear those.

jjseel 06-02-2007 09:08 PM

Is there any suspension lift at all? (BTW WELCOME to WF) If no suspension lift, a budget boost isn't expensive, and will keep the height. Of course, it all depends on what YOU want to do with it...

TxFireman1972 06-02-2007 09:11 PM

no suspension lift. Just body lift. Really just the wifes daily driver so no wild off road trips.

Triple88a 06-02-2007 10:59 PM

how tall is the body lift? measure the height of the plastic puck that sits on top of the rear bumper under the body.. I'm in the process of installing BL so the stuff is fresh in my head

TxFireman1972 06-02-2007 11:05 PM

its a 3" body lift

jjseel 06-02-2007 11:54 PM

Ugh. Understand. How about a lesser body lift and the BB. Not as bad. 3 inch suspensions start to cost...

dwdrums801 06-03-2007 12:37 AM

2 inch bb 1 inch bl/mml?

TxFireman1972 06-03-2007 07:18 AM

Anyone have pics of what the 1" body lift looks like as far as the gaps? That what I was thinking was the 2" BB and a 1"BL/mml. Just want to see how bad the gaps are. Thanks

tiger22 06-03-2007 08:07 AM

here a some pics of a 2.25"BB and a 1.25 JKS BL on 32X11.50's

TxFireman1972 06-03-2007 09:18 AM

Looks great ..thanks for the pics

jherrin215 06-03-2007 11:41 AM

Here is a pic of a 2 in BB and a 1 in BL on 33's

nicolas-eric 06-03-2007 12:12 PM

32 Attachment(s)
does your TJ have the stock rear bumper?
you can turn it around 180 degrees. then it will come up a bit more than 2". that covers the gap at the rear.
on my TJ you don´t notice that i have a 2" BL. only if you look under the jeep you´ll see the BL pucks.

mrbigjeep 06-03-2007 12:57 PM

i don't get how the rear bumper flip seems like the bracket that attaches the rear bumper to the frame would hit the body mounts...and it would also mean that it wouldn't be attached to the frame any more unless you welded on some new brackets.

Triple88a 06-03-2007 01:42 PM

so i just finished installing my 2" BL.. i'll drive it for a little and make sure there are no problems.. i can give you the stock bolts... id recomend just moving down to a smaller bl since many things have to be modified to do a bl such as the fuel hoses and stuff so it will be hard to switch to a no bl at all since you have to buy stuff to make it work..

dwdrums801 06-03-2007 09:56 PM

y not takeing the pucks out and cutin them in half?

TxFireman1972 06-03-2007 10:19 PM

I'm curious about more info on the bumper flip

Triple88a 06-03-2007 10:55 PM


Originally Posted by dwdrums801 (Post 87963)
y not takeing the pucks out and cutin them in half?

Its not that simple.. you have to cut the pucks evenly on each side, the pucks split the middle which i think its there for extra support. you also gotta drill and or cut the radiator, transfercase, steering brackets and shorten the hoses on the gas tank since its made for 3" pipes.

I'm also interested in that bumper flip thingy :), i looked at mine today and couldnt see it work.

wrangler55 05-22-2010 12:35 PM

Hey i just purchased a 2008 jeep wrangler unlimited and i was looking for a reasonable lift and tires to put on it. Im considering putting a teraflex 2.25" bb lift and bfg 295/75R16 all terrain tires. Any advise?

All times are GMT -5. The time now is 09:18 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.