Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Upper Control Arms? (http://www.wranglerforum.com/f282/upper-control-arms-86024.html)

Mclaughlin_1234 03-23-2011 12:00 AM

Upper Control Arms?
 
I just installed a 4 inch skyjacker lift on my 04 TJ Rocky Mountain Edition.

It came with a tranfercase drop and lower control arms but am i going to need upper control arms?

Im trying to get the ride as nice as i can /

Thank you

Littleyellow 03-23-2011 12:15 AM

It came with it and bought them an dont know if you want to use them? Do you know what theyre for? That should answer your question.

Mclaughlin_1234 03-23-2011 08:38 AM

My kit didnt come with them no....Im asking if i need them or not or can i get away with it with a 4 inch lift?

T2000J 03-23-2011 09:16 AM

Quote:

Originally Posted by Mclaughlin_1234
My kit didnt come with them no....Im asking if i need them or not or can i get away with it with a 4 inch lift?

At 4" you should have got 2 brackets to readjust the rear diff angle with the upper arms . My kit came with them but I went with rokman upper insted of the brackets .

UnlimitedLJ04 03-23-2011 10:05 AM

Quote:

Originally Posted by Mclaughlin_1234 (Post 1133432)
My kit didnt come with them no....Im asking if i need them or not or can i get away with it with a 4 inch lift?

If you want to adjust your pinion angle, you need adjustable uppers - preferably adjustable uppers and lowers. If you run lower control arms in the rear that are much longer than stock, the tires will hit the rear of the fenderwell and the diff cover will hit the gas tank.

Read here:
What is a CV shaft and why do I want one? - JeepForum.com

Arms:
www.rokmen.com


All times are GMT -5. The time now is 01:21 AM.