Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ General Discussion Forum (http://www.wranglerforum.com/f290/)
-   -   Looking for a shop for frame repair in NE Ohio (http://www.wranglerforum.com/f290/looking-for-a-shop-for-frame-repair-in-ne-ohio-89193.html)

fullberg 04-13-2011 11:19 AM

Looking for a shop for frame repair in NE Ohio
 
Hey guys my 91 YJ has a hole the size of a dime on my front frame rail on the bottom where the steering gearbox mounts to the rail that I want to get fixed before it gets any worse. I can't weld so I'm looking for advise on a shop that does good work in north eastern Ohio (around youngstown) If no one knows any are there any specific questions I should ask before taking it to any welder or weld shop? A friend at work says he can do it I just feel a bit better having it done by a shop that has performed this kind of repair before. Also what should this kind of job cost on average? Thanks everyone.

fullberg 04-14-2011 09:22 AM

bump

superduty_5.9 04-14-2011 09:39 AM

You will probably have to have your friend weld it or find a small little shop. Most big shops don't want the liability.

crtaylor 04-14-2011 09:26 PM

Pics ,Im over in PA Been fixing ,splicing frames /unibodys for yrs. Not a problem.

fullberg 04-15-2011 12:54 AM

So whats something like this usually run in price to get fixed?

crtaylor 04-15-2011 08:55 PM

Lets see what we are looking at and go from there. we used to get that question all the time over the phone. I have to see it .how bad is it really it may look like a small hole but when you get into it ,the hole becomes section replacement. rust is a freak ,until you start poking around you dont really know.
go take a pic or meet me some where .
Chuck

Jeff22 07-10-2011 11:07 AM

crtaylor,

Do you still fix Jeep frames?

I have a 1990 YJ that the frame needs repaired on the driver side, at the stearing box.

lease let me know.

Sincerely,

Jeff22


All times are GMT -5. The time now is 12:08 PM.