Starter Piece Issue (I think)
Mr. "Break-em, but can't begin to fix em" here,
I seem to have a problem with my starter. I have to have someone crank it while i pull the wire back into place. It would seem the noted piece is broken and loose.
I have ordered a new starter. But any ideas to hold it in place until it arrives. It's a jeep, not an AH-64. I shouldn't require a ground crew to start up .
Ps.. :doh: that is the starter, right?
If you got it out.... you MIGHT be able to solder that back together short term. You would need a pretty hot iron and you will need to get all of that area meticulously clean. Not probable..... but possible....
|All times are GMT -5. The time now is 08:03 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.