Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   bolt trouble (http://www.wranglerforum.com/f210/bolt-trouble-918.html)

khenderson 01-12-2006 09:33 PM

bolt trouble
 
alright, so i was ready to put my headers(new) and intake(milled out) back onto my jeep this evening when i ran across a problem. the bolt on the front of the block has sheared off. need the best way to get that bad boy out. thanks guys.

4Jeepn 01-13-2006 10:07 AM

Only thing I have heard of is a and ez-out, which I hear may not be so easy to use.

jeeperman 01-13-2006 10:57 AM

Quote:

Originally Posted by 4Jeepn
Only thing I have heard of is a and ez-out, which I hear may not be so easy to use.

What he^^^^ said. Other than that, you will have to drill it out/have it drilled out and then retap it. Sorry, that always sux when that happens!:mad:

1BLKJP 01-13-2006 01:38 PM

Yup I third that motion. drill it and use and easy out.

khenderson 01-13-2006 04:22 PM

effin hosed!!! was afraid of that.

sroberts 01-13-2006 07:54 PM

Those guys are right, but there are different kinds of EZ outs. Some are square and some are fluted. The fluted are my favorite. What ever you do don't break the EZ out, you can't drill one to save your life!!

Steve

jeepmutt 01-23-2006 08:38 PM

I've not done this, just speculating, but could another bolt be welded on? Perhaps a smaller diameter bolt so you could run a bead around it onto the busted bolt... then just put a wrench to it and back the whole thing out.


All times are GMT -5. The time now is 05:26 PM.