Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   rectangular fog lights (http://www.wranglerforum.com/f282/rectangular-fog-lights-93042.html)

jebby 05-09-2011 09:59 PM

rectangular fog lights
 
got a chance for some near free fog/flood lights but there rectangular any suggestions on how to incorporate them into my tj withought them looking too dumb? just slap uim on teh bumper and go or pass or what?

Shelby427 05-09-2011 10:05 PM

Hey free is good!

I guess mount em on the bumper where the factory ones go. Or get em and swap em with someone who has rounds and wants rectangular ones.

Or go round on the bumper and rectangular on hinge mounts.

Might not look too bad if you had a set of round or rectangular driving lamps too on the bumper.

Wrangler06 05-09-2011 10:08 PM

i think theyd look fine, you have the square turn signals so they will go in with those fine

jebby 05-09-2011 10:11 PM

hardware is for the bumber mount (like stock) so thinking thats what ill do unless i figure out a way to put um on the windshield without too much hassle.

Shelby427 05-09-2011 10:15 PM

Hinge mount isn't that hard. You can buy or make the brackets, simple angle mount.

Only bugger can be getting those torx bolts loose sometimes.

Do it right either way. If you don't use the stock fog lamp harness, build your own.
Fused power from the battery. Use a switch to operate a relay, to run the lamps.

jebby 05-09-2011 10:30 PM

no factory harnes so ill have to run the wires.... any suggestions for getting the wiring through (either from windshield or bumper) to the battery and to a switch?


All times are GMT -5. The time now is 11:48 PM.