You'r in for the thrill of your life. The harness is a pain in the ---. If your like me and have big hands they'll be all cut up. If your not handy get help. I got mt harness from QUADRATEC and the instructions are all pictures. Good luck.
05-15-2011 01:16 PM
how does this panel pop out? i havent tried to remove mine yet
05-15-2011 01:40 PM
Yea I'm in the same boat with you guys. The kit is about 100 bucks and comes with the harness split washer bottle with pump and all the hardware. I just left it for now.
I too have the switch panel but it just looks like a dead switch. I do not think it is for fog lights as their isn't a harness.
05-15-2011 02:53 PM
I think its for the rear defroster.......
05-15-2011 03:14 PM
Thats the factory fog light spot. I have a 98 that came with a hard top from the factory and the switches are as follows:
Rear Window Defroster Rear Window Wiper/Sprayer Fog Lights
05-15-2011 03:55 PM
What is the switch in that position?
okay i followed my head light harness all the way around to were the fog light wire comes out. It comes out with the turnsignal and parking harness does. But where the turnsignal harness plugs into the head light harnes theres 4 wires coming off the vehicle side but on the light side of the plug theres 3. Is the fourth wire the one not coming out of the plug the fog light? its a blue wire?
05-15-2011 04:01 PM
Go on line to QUADRATEC and look at the hardtop harnesses. There are two (MOPAR) and the installation directions are there. There is one for 97 to 03 and one for 04 to 06.
05-16-2011 06:25 PM
The one you are pointing to is the fog light switch at least from the factory. You can put the switches in anyway you want.
Not sure what you mean by number of wires but the harness before it plugs into the top has 7 wires.
05-22-2011 07:51 AM
I put a fog light switch on it. It lights up when your turn lights on i dont know if i bought a bad switch. But where are the relays for the fog lights?