Jeep Wrangler Forum

Jeep Wrangler Forum (
-   YJ General Discussion Forum (
-   -   Headlights (

Bradsgtz 05-16-2011 09:05 PM

The other night I had my headlights on and tried to click to highbeam. It wouldnt click into high. The next night i start off and turn the lights on and had nothing but parking lights. So i had to make the drive holding back the lever to run highbeams. Just wondering if anybody has this type of problem. thanks

airborne*yj 05-16-2011 09:16 PM

Had the same issue a few times, actually an easy fix. If you reach down on the steering colum find the rod that connects the light switch lever to the actual switch , just bend it a bit and all should be fine

Bradsgtz 05-16-2011 09:23 PM

So pull the wheel off and check that out. I just cant understand why my headlights arent coming on. already took the headlight switch apart and bent the tabs and regreased it

VoodooShot 05-17-2011 12:04 PM

He is referring to the highbeam/low beam
That's a diff switch on the column . It may be bad or if you had pulled it to hard just bent some .

All times are GMT -5. The time now is 01:54 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.