Help with a Drawtite
I need your help. I have a Rugged Ridge exhaust system. The tailpipe is straight at the end rather then bending down to the floor. Anyway, I've just bought a draw-tite receiver hitch, started to fit it and realised the tailpipe will be in the way, as the hitch is based on the tailpipe bending down to the floor.
The option I can think of is cutting the tailpipe by some 6inches. This will still mean that the exhaust fumes will hit the hitch as they exit the pipe, albeit a couple of inches away.
Has anyone else come across this problem? Is this the only option? Is reducing the length of the tailpipe a viable option?
I should add, don't want to change the rear fender
I'd personally stop by an exhaust shop and have them fix it for you...Quick, easy and they can do it right.
Thanks. I live in the United Kingdom, so I believe this option is pretty limited. Will take a look at this option via the power of Google.
|All times are GMT -5. The time now is 10:33 PM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.